User Rank
Excellent Article
tekochip   8/30/2012 1:47:21 PM
Excellent article, very thorough and detailed.  Few people realize how difficult it can be to specify a simple resistor.  It's also quite common to use two resistors in series to satisfy redundant failure analysis.

User Rank
Electric meter current measurement
tedtw   8/30/2012 1:12:51 PM
Resistor consideration is related to instantaneous or repeated peak MOV power dissipation, too. Few engineers realize that a lightning stroke does not consist of just one pulse, but five or more together. I proved this years ago with a camcorder, and viewing a lightning strike frame by frame I saw separate bolts of lightning in every other video frame.Our eyes perceive a lightning strike as flickering, but in reality each strike is a series of discharges until the cloud voltage drops low enough to stop altogether.

Consider each meter is also sealed environment with a glass cover, much like a greenhouse but without ventilation. Now consider a typical meter sitting on a outside, south-facing wall on a home in the deep south. Internal temperatures can easily rise up near the upper operating limits for most electronic components.

Both MOV and resistor power ratings must be greatly de-rated to insure long term reliablility of both. De-rating is also required for other electronic components. Proper testing of components requires both good equipment and use of an environmental chamber during testing. This type of testing reveals flaws and design issues with components not previously apparent or even considered as a problem.

With record-breaking temperatures around the country, it's hard to find a more punishing environment for electronic components. Perhaps a oil well probe lowered down to the botton of an oil to make temperature and resistance measurements might be a worse environment, but that's just a temporary high temperature environment, while a electric meter is on-going day after day A wall ona building is even worse than the passenger compartment in most vehicles. At least in the case of vehicles, electronics can be located under car seats or behind the dashboard, away from direct sun exposure.

Partner Zone
Latest Analysis
We celebrate Halloween with a look at 13 of the scariest technology-based horror movies of all time, as well as some real-life technologies that bare a frightening resemblance to what's on screen.
When Charlie Miller and Chris Valasek made headlines by hacking and crashing a Jeep last year, the event followed many months of study and trials.
A unique set of multi-network servo drives introduced by Mitsubishi Electric enables the company’s servo motion capabilities to be integrated into EtherNet/IP, EtherCAT, or PROFINET networks.
With a better understanding of materials’ response to load and temperature, researchers could potentially use the knowledge to improve design. The research could even help geologists studying plate tectonics.
A panel on cybersecurity at ARM TechCon called for regulations to protect the security of connected devices.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course November 8 - 10:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service