Yes, back in those early PC days, even a casual user had to learn DOS codes. I remember what a shock it was the first time I saw a PC without a 5 1/4 inch port, then seeing the first PC without a 3 1/2 inch port.
Ahhhhh, the good old days! Wow does this bring back memories.
When I was in high school our PC's had 8" floppies! I remember when they came out with the 1.2MB 5 1/4" disks (a big jump over the 360KB). So much stuff you could fit onto them. Then the 720K 3 1/2", then the 1.44MB 3 1/2"!
I remember working hard to get my entire OS on one disk (including the memory manager) so I could boot with only one disk (no swapping). Then pull out that disk so you could put your program disk in to run something. If you were lucky, you had two disk drives (or even better, you set up a RAM disk so your most used DOS utilities were available all the time, without hunting for a disk). You really had to understand the machine to be able to do that.
Now, my digital camera takes still pictures that wont even fit on the largest floppies (>10MB). Its memory card is 32GB (> 20,000 times larger) and almost indestructable. Amazing when you look back on it.
A friend used to work in tech support at an insurance company. They'd send out disks to various departments and one particular department always complained the disk they received would be unreadable.
After sending several replacement disks they decided to visit the manager and see what the problem was. My friend went to the manager's cube and asked to see the disk before they tried to use it.
The manager spun around in his chair and (you guessed it) removed the magnet holding the disk to his file cabinet and handed my friend the disk.
@Tim, that reminds me of my first PC I got when I started college. Two 5-1/4" drives with no hard drive. That was enough to use WordPerfect in one drive (it came on a total of 2) and use the other dirve for data. I upgraded to a 30MB drive a year or two later. It also had a monochrome monitor, but a Hercules card to due graphics.
I have used the 3 1/2 inch floppy disk for many years and not had one fail, except for those that either got wet or had pop spilled on them. The cheaper drives were not so reliable, though.
But do you really want to give out multi-dollar memory sticks to pass out documents of only a few dozen K? when a floppy disk, not discounted, cost maybe 5 cents? And I do know several folks who have had memory sticks just die on them, and nothing was recoverable. At least from a disk it is often possible to recover most of a damaged document. IT might not be good for code, but recovering most of a document has a lot of value.
Also, we discovered that the 3 1/2 inch floppies were not so very easy to damage with a magnet, although it certainly was possible.
At my first job out of college, I used a CAD station that had a 50 Mb hard drive and a 3 1/2" floppy. As there was no e-mail or network, it was hard working on a project was we had to save to floppies to transfer between engineers. We ended up installing compatible tape backups on the computers that would allow us to effectively transfer files between computers (as long as they were not above 50 Mb).
Kids today have no idea how dedicated you had to be in order to be a techie back in the day! 3 1/2"s were a big improvement and CDs were phenomenal...WOW! We can really store some stuff, baby!
Seems USB drives are the storage of choice now...which I must admit are much hardier - they are almost teenager proof! A friend of mine told me you can no longer buy a new car that will take a multiple CD deck even after market - USB ports are the only game in town.
I remember the colors when they came out, too, Nancy. It seemed so surprising. I was never a big fan of the disk. They failed so often. I remember sending articles to magazines on those disks. Every so often the disk would arrive at the editor's desk unreadable. Quite a pain.
I used to work on hall effects so naturally we had tons of magnets lying around - we had to be super careful keeping them away from any media. I remember when 5 1/4" floppies came out in different colors - we thought that was SO COOL!
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
