Thanks, Dave, for that book link. I've always been fascinated by the history of inventions. This discussion makes me wonder how many of them came spontaneously by contemplating what's around us in nature, both plants and animals.
Thinking_J, thanks for all that info all about legal ramifications of flying robots in the US. Who would've guessed such laws were already in place, and that there are so many of them?
Thanks, Dave, for that book link. I've always been fascinated by the history of inventions. This discussion makes me wonder how many of them came spontaneously by contemplating what's around us in nature, both plants and animals.
I can envision many applications for these small soaring robots, all of which would not be an invasion of privacy. Thinking_J has excellent points governing use and I'm somewhat amazed that law-making agencies have already formulated laws restricting their use. A great number of uses seem to be desirable for inspecting physical structures; buildings, power plants, cooling towers, etc. as well as hazardous sites restricting entry by emergency personnel. I wonder if any governmental agencies offer waivers for this type of work strictly for commercial purposes?
SparkyWatt, that's a very interesting design idea. Do you by any chance design robots? Or have an idea of what such a hybrid would look like and how it would work?
Clinton, thanks for the video link. That's by Parrot's AR Drone 2.0 quadricopter-protected version. We show version 2.0 (without the quadricopter) in Slide 3 of this slideshow. It's a talented machine full of features.
RNDDUDE, I think the AirJelly is probably the most sophisticated design of all of these, followed closely by AirPenguin. And they're so beautiful and so un-clunky. Festo reminds us that machines can look natural.
Currently there are numerous laws governing these devices.In the US....
- all remote and autonomous flying machines (that don't carry people) must operate within a 400' virtual cube or visual range of human operator/supervisor with a max altitude of 400'. Depends on which laws are being quoted. (FAA)
Obviously the US Military has exclusion from most of these rules... especially, outside the US.
- All said devices cannot operate where they may interfere with full size aircraft (FAA).. specifies on this vary a bit. Basically, don't fly at the end of the runway!
- There is some legal liability issues .. reason why most RC modelers work with AMA rules and their insurance. Don't want to lose radio contact or control, see it crash into a car, while it is going down the freeway, then be held personally responsible for the results!
- NO one can use these devices under current law for professional aerial photography or any professional service (this is a ridiculous recent ruling). This shut down one CA company. Doesn't matter if you a operating it within 10ft!
- Law enforcement use of these types of devices for aerial surveillance of any type is currently being reviewed and debated, Lot of concern over privacy abuse. Silly. when it is already being done with full size helicopters.
Of course, because it is still a new field.. enforcement of any of these laws is spotty at best. Most were intended to keep RC modeling safe.
My favorite quote from Frank Zappa: "We are a nation of laws - randomly enforced".
In other countries..... a license is required for operation of these flying machines.
These are interesting and useful types of robots, that is certain. But the Japanese "sphere" thing is not that big a deal. I have seen another video of it, and it is mostly a helicopter with a spherical space-frame shroud, which does offer a good bit of protection.
I have also seen the cheap helicopter thing that sends pictures back to a smartphone. It is quite a toy. A similar device equipped with a high resolution camera would be a serious snooping tool, all for under a hundred bucks. So now every kid can snoop wherever things can fly. Of course, no laws will be passed about this until some politician is compromised big-time, then we will see just what the courts will have to say.
But the flying remote piloted robots are here to stay, and getting better and cheaper every day. IT will certainly be "an interesting time."
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
