Beth, this is a great story. With the advancement of electronics and design software, the missing piece was manufacturing. As another great example of the power of 3D printed objects this is very encouraging. After all, if you can make a receiver for a gun with 3D, you should be able to make good prosthetics.
Love that last point, Naperlou. Absolutely, 3D printing is advancing to cover all ends of the spectrum in terms of manufacturing. In terms of medical technologies, it's really had an impact even beyond the manufacture of custom prosthetics. Check out our slide show on 3D printing in the medical sector.
Nice story, Beth, especially the part about Emma's magic arms. That's an impressive example of the use of 3D printing. Were the magic arms an addition to her actually arms (as in joint replacement)?
Rob: Magic arms is actually just a pet name she gave to the prosthetic device that helps her now have control over her arms to do everyday things like play and feed herself. It is more of a term of endearment to show her enthusiasm for new mobility.
What I'm wondering, Beth, is whether the device is external support for her arms or whether it is a joint replacement/support that has been inserted within her arms.
Yes, I also agree. An inspiring story about Emma that really drives home the point on how technology breakthroughs can have such a positive impact on people's lives. Since the cost of 3D printing has come down so much, I imagine that new arms could also be printed again should the current ones wear out or become damaged.
What a wonderful story. If Oscar Pistorius' performance in the Olympics taught us anything, it's that prosthetic limbs needn't be a handicap. I really do believe that technology will eliminate all disabilities by the end of this century.
It's great to see these types of advances taking place. Just in the same way that high performance cars eventually see their developments embodied in the consumer versions - I hope that these techniques eventually become available to the average consumer. What a boon to veterans, the disabled and the aging.
With prices on 3D printers coming down and with materials and other related technologies vastly improving, I do think capabilities like these will become easier and more accessible to mainstream medical practices, aiding in their adoption.
@Greg: That's actually a point I didn't spend time on in the post, but a real lifesaver for Emma's parents. There is obviously wear and tear on the device, particularly as Emma gains in mobility. With the 3D printing approach, her parents can simply contact the research/medical team and explain what part is broken (take a picture if need be) and a replacement can be easily and cheaply produced. Minimal downtime, which is a great thing for Emma.
I imagine as a younger patient grows, the design could also be quickly scaled up little by little and printed again (to help save prosthetics fitting time too).
I can see that it would be great to work in this field. I have a 4 year old grandson born without one arm - not even a shoulder. I have wondered if it would be possible to fit him with a wrap-around vest that a prosthetic arm could be attached to. The hand on his one arm has only a thumb and two stubby half fingers. This handicap is apparently due to his arm and hand being pinched off during development by the amniotic membrane. He is a very happy child who doesn't yet recognize he is so different from others and he naturally uses his feet when one hand can't complete a task. He may never need a prosthetic to get through life, but it would be something worth checking into.
@kellerbl: It sounds like there will be some great opportunities for your grandson and isn't he lucky to have a granddad that is so up on the technology to pose some suggestions. The team that developed the WREX is Dr. Tariq Rahman and designer Whitney Sample--both from the Nemours/Alfred I. duPont Hospital for Children in Wilimington, Del. (Don't know where your grandson is)
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
