Ann, great article--as usual--great job. This is one subject that really interest me and I certainly applaud DARPA for taking a look. NASA tells us the following about space junk:
The overwhelming number of particles are smaller than one centimeter; i.e., 0.39 inches, but others are of considerable size. Estimates are as follows:
· 1,500 pieces of debris weighing more than 100 Kg or 200 pounds
· 19,000 pieces of debris measuring between 1 to 10 centimeters; 3.9 inches
· An unestimated number of particles, mostly dust and paint "chips" resulting from collisions that have occurred with larger objects also orbiting. Some "guesses" put that number into the millions.
For the most part, the debris can be categorized as follows:
· Jettisoned garbage from manned spacecraft, purposefully disposed of into lower earth orbit
· Lost equipment; i.e. cameras, tools, measuring devices, fabric hold-down straps, nuts, bolts, cotter pins, etc.
· Debris from collisions tearing apart structures either jettisoned or lost
· Rocket boosters that orbit yet remain in space. Some, over time, experience decaying orbits, eventually falling to earth.
With at least fifty nations participating within the space environment, the amount of debris can only lessen but not be eliminated. At the present time, over 20,000 pieces of debris are being tracked by these fifty nations. Let's hope DARPA is successful and we can lessen the expense of space exploration.
I meant floating junk. Space junk could be "kicked" into a decaying orbit to land on a vacant lot in NY ! sorry, I meant N. Canada, Russia, or central Oz. ... somewhere that what little remains could relatively easily be salvaged, rather than dumping even more junk in the sea.
Now that is the best idea of all! We have sunk tons of steel and aluminum, plus who knows how much plastic and even wood that could be salvaged without having to use space-faring technology.
However, space does need to be cleaned up. There is a lot of hazardous material "floating" around up there. I don't want a skylab full of nukes and garbage coming down on my head in the middle of the night. Nor do I want to have a high risk of being smashed by Russian/American/Chinese/European/Iranian/Pakistani/N. Korean/Japanese/Texan flotsam and jetsam if and when I decide to venture into space with my junkyard-built touring rocket. Yes, let's get space cleaned up!
How about cleaning up our oceans. Millions of tonnes of junk have collected in the middle of our oceans. Surely an economical means of collecting this could be found. Much of it, I assume, is plastic which could be recycled.
Adding a dash of relativity... As I sit here at my Chromebook, I'm spinning on the surface of the earth at nearly 0.5 km/s. We are all (including the geosynchronous satellites) orbiting the Sun at 30 km/s, orbiting the center of the Milky Way at 250 km/s, and flitting among our local cluster of galaxies at 300 km/s -- for a grand total velocity of over 580 km/s. I'm not sure how I'm able to keep my coffee from spilling on the keyboard.. =]
The Hollywood motif that comes to my mind is Transformers or more specifically Star Trek: The Motion Picture in which Voyager 6 was repaired by a race of machines to become V'Ger, a machine that grew by assembling salvaged parts into itself. It is also suggested that V'Ger was responsible for creating the race known as the "Borg".
While we develop the use of satellites in the creation of SkyNet, now we have to contend with a DARPA initiative to create the Borg. At least we are not genetically modifying apes... no wait...
Everyone knows Mayberry was built on a series of underground missile silos. Barney has a Ph.D. in physics, and Andy was a nuclear propulsion expert. Everyone knows that!
Yes, I love that motif. It's one of the fascinating aspects to science fiction movies, the actual science. So I was thrilled when Apollo 13 came out. Here was an exciting science fact movie -- the ultimate Sherlock Ohms.
The astronaut-outside-the-spaceship motif is the classic scenario of the opportunity for that disaster. I've seen it in many movies, as well as learned about the dangers with real astronauts.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
