I am currently using the PCI slot mounted version Hilscher cifX card. They have versions that will handle a number of the industrial Ethernet flavors (Ehternet/IP, EhterCat, Sercos, etc.), and ones that will handle Profibus, Canbus, DeviceNet, etc.
Switching to a different network involves switching out the PCI card with the appropriate version for the desired protocol. The software basically doesn't change.
I haven't used the plug in style, because our products don't currently have a form factor where it would be usable. My experience with the cifX PCI slot version has been generally positive. I have used the Ethernet/IP version, and the Profibus versions, both connecting to Allen Bradley PLC's.
A plug in module such as this would definitely help equipment machine designers because of the interoperability with various fieldbus products and protocol standards available. The Hirshler plug in module will allow the equipment machine designer to focus on the functional requirements of the machine instead of the networking infrastructure which requires significant design/implementation time .
Hi, mrdon. Exactly. The modular approach also simplifies the equipment design because engineers would not wonder if their communication interface worked properly. One less "unknown" to wrestle with when bring up a prototype or testing equipment in the field. --Jon
Thanks. The concept of plug in modules is to remove the complexities of building discrete circuit interfaces which always provides a challenge to the overall system integration phase of product design. The modular approach to equipment machine design just seems to make logical sense in the grand scheme of New Product Development. Nice article!
For years, I've been hearing suppliers talk about the possibility of having the engineer focus on the machine requirements, instead of the networking protocol. In the end, though, those suppliers were usually pushing one proprietary protocol. Seems like this plug-in module finally makes it possible to turn the vision to reality. Nice to see the optimism in your comment, mrdon.
Thanks for the kind words. Having worked in the Automotive Industry, modular design was the mantra for all design engineers. The vehicle communication bus protocol back in the early nighties of Chrysler Vehicles were proprietary based and made it difficult for service mechanics to run diagnostics because of non -interoperability. Even with the PLC based automation controls in the assembly plants, networking different vendor's machines was quite a challenge because of different protocol standards and specs. The NetJack would have made our lives (the Electrical Plant Engineers) easy because of the modular approach to networking and protocol management.
Thanks for the kind words. Having worked in the Automotive Industry, modular design was the mantra for all design engineers. The vehicle communication bus protocol back in the early nighties of Chrysler Vehicles were proprietary based and made it difficult for service mechanics to run diagnostics because of non -interoperability. Even with the PLC based automation controls in the assembly plants, networking different vendor's machines was quite a challenge because of different protocol standards and specs. The NetJack would have made our lives (the Electrical Plant Engineers) easy because of the modular approach to networking and protocol management.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
