Not much to it, really. I took an off the shelf electric mower and added some panels to charge batteries. I've since replaced the very heavy SLA cells with a 10AH NiMh pack, and that makes the machine much easier to navigate. It takes about three good days to recharge the cells, so sometimes I mow on a particular day to make sure I get a good solar harvest.
William, windows may not generate a lot of power on their own. But with conventional electricity produced by fossil fuels, we have been conditioned to think of only a single power source technology. With alternative energy sources, the idea is often to combine different power sources and with multiple energy inputs. I've become more aware of that mix living out in the forest with electricity for lights and powering the ceiling fan (for cooling and heating), a woodstove for heat, and propane for hot water. So the idea of getting energy in a single building from solar and wind, for instance, and from window films plus panels on the roof, or those plus passive solar collection methods, makes sense.
I agree with Mydesign about the investment in active PV solar being worth it over the long run. However, homeowners have to be able to afford the several thousands of dollars investment and not everyone can do it. Regarding solar panel thickness, yes, that's one of the whole points of this project.
William, all the natural energy conservation methods require a little bit upfront investment and we can have a fair ROI in long term. The immediate ROI is less because, we are using the generated power for domestic use and it has to be calculated according to the tariff sheet provided by the local energy distributor. I had done a similar calculation before going for solar power to my house and it found that it will take minimum 20 years for cover up the initial investment cost. But have the proud that am using natural resources and no need to worry about tariff hike or power cuts.
Ann, the normal Solar panels are of thick in size and it cannot be used other than fix in terrace of buildings. If the thickness is less and of comfortable size, they can be fixing in outside walls and window doors. So most of the people may prefer and in turn more natural energy can be produced.
This is an interesting concept indeed. But aside from the discussions about relative efficiency, how much useful power is a window-cell going to produce? Then, consider the logistics of transporting the power from a window that can open, because some folks do open windows for ventillation at times. Finally, consider the expense of the hardware needed to convert whatever power is produced to a voltage-current level that can actually be useful.
My whole point is that what we have here is an interesting developement that may not be "worth the effort" to implement it. At that point it becomes valid to question how much effort and resources should be expended in that direction.
All kinds of passive storage methods have been developed, many of them in the 70s and 80s, some more recently, Most of them derive from building designs that are thousands of years old. This is not new technology.
I don't think a smart grid is needed. Some of the original solar power designs in the 70s were passive: the power generated is used by the building that generates it. You don't need a smart grid to do that.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
The government wants to study your brain, and DARPA wants to use similar information to give robots true autonomy beyond any artificial intelligence developed to date. Sound like science fiction? It's not.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
