I agree, Beth, the large buildings have the scale. A small savings per window would deliver significant power. In a dense area like Manhattan, there may be some limitations on direct sunlight, but around most of the country, these large buildings are pretty clear of obstruction.
Commercial buildings would be a great application and these mega buildings also have some sort of budget which would allow them to invest in the storage capabilities that are so critical to making this effective. Especially since many mega buildings in cities (I'm thinking NYC) have lots of self-induced shade due to their size and number--a factor that could limit the windows' ability to harvest energy even on sunny days.
Energy harvesting technologies are well-known to produce really tiny amounts of electrical current -- at the microamp- and even nanoamp-level in some cases. Any idea how much these films could produce, Ann?
I would guess the most efficient use of this technology would be on high-rise office buildings. The tall buildings have acres of windows, far more per square foot than a private residence.
I agree entirely. With a consumer grade cell at 15%, a 4% cell that will probably not be properly aligned is going to need to be fairly cheap. Don't get me wrong, I love solar, I even converted my lawn mower to solar. The idea of a window that still functions as a window while collecting solar energy is fantastic, but if each window only collects 1Wh for a sunny day, the window will need to be as cheap as glass.
I agree with you totally. This idea of adding solar cell polymer material to windows is the best one yet for generating electricity. With the amount of sunlight passing through windows daily, I would imagine sufficient amounts of electricity can be generated easily. The next item to include in the energy conversion process is an innovative way to store the energy for use on cloudy days.
This is a really cool development. The real key (costs aside) will be integration of "power windows" into a local smart grid. In this case local would mean within the confines of the building that the windows are installed in. What a great way to harvest power for low voltage lighting, though.
It's sources report the following efficiencies for conversion of sunlight into biomass (usable energy)
Plants 0.1% - 2 %
Crops 1% - 2%
Sugarcane 7% - 8%
At 4%, this device is on the high-side when compared to energy-harvesting bio-fuels. With even more development, this material could be quite a winner -- and we could continue to use our corn and soybeans to feed people and livestock rather than engines...
At 4% efficiency, and a practical application on the south side of office buildings, cost is going to be the deciding factor. Let's hope that taxpayers don't get stuck funding this as the total outpput could be rather restricted.
I wouldn't mind having those windows, either, even here in the woods. There are various types of films that can be added to windows that purport to do something similar. Here are some recent ones:
http://www.pcworld.com/article/241152/3m_film_turns_windows_into_transparent_solar_panels.html
http://cleantechnica.com/2012/07/06/39893/
http://www.newenergytechnologiesinc.com/technology/solarwindow
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
