I wish I had your discipline, Ann. I usually just dig in and refer to the instructions when I run into trouble. I think the value of each approach depends on the quality of the instructions. I recently had a clogged vacuum. When I wasn't able to locate the area of clogging, I turned to the instructions. They were of no help. So I continued a trial-and-error approach until I found and fixed the problem.
Glenn, sounds like your predecessors didn't work as carefully or methodically as you did. I'm also a fan of reading instructions before proceeding with building, installing, or troubleshooting something, or using a new machine. First, I read through the procedures at least once to make sure I have all the tools and supplies I need, and to determine where I'll be doing a repair or assembly task: a table, the floor, outside on the deck, etc.
Ann R. Thryft; Other than knowing the other techs were unsuccessful, I didn't know what testing they had done. I did have the advantage of more experience with that timer from running laboratory tests.
I also have the bad habit of reading manuals and instructions. Some technicians seem to believe 'real men don't read manuals'. The solution may be hidden in an unrelated chapter, or only inferred to, but many times the answer is in the manual. On the other hand, unless the manual is formatted to be printed, it may be useless. An on-line manual needs to be formatted so that it can be flipped through page-by-page. The example that I use of a poor manual was trying to find how to delete a chart in Excel. You can't 'delete' a chart. You can't 'erase' a chart. But if you already knew how to 'remove' a chart, you wouldn't need the manual.
How about TROUBLESHOOTED?? That sounds even more grotesque! Or, maybe the past participle TRUBLE SHOOTEN?
That's what's so perfect about the GERMAN language. They have a specific word to indicate exactly what they want to say, WITHOUT 99 exceptions of revery rule of language (as in English!)
That is a great question, Ann. Yet, as we've seen with so many of these Sherlock Ohms postings, something as simple as the amount of voltage going to the unit gets overlooked.
The glue problem looks even more interesting to me. Why didn't the other people who troubleshot (is that a word?) this problem realize the conclusion that the author came to?
That's interesting that the two mistakes (voltage and jumper) saved the day. If there hadn;t been the second mistake, the first mistake would have cost $1,700. Thanks goodness for the second mistake.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
