I've already got a 3-axis accelerometer, a 2 axis rate gyro, and a barometric pressure sensor I'm testing. All these sensors are very small and light. The weight does climb some when you start adding the microcontroller, an acutator, and a power source capable of driving the actuator. The actuator is the power problem, the rest of the electronics requires very little power.
Right now I'm working on putting a recovery system in the rocket that uses an acutator to deploy a parachute based on a set time from the launch. This is simple and doesn't require even a microcontroller. It does add more weight that I had hoped, about 20 grams. To keep the weight down I really should be implementing everything with surface mount devices but it's a lot easier to assemble through-hole prototypes (at least for me).
Once I get a reliable recovery system I'll consider adding more complex electronics.
I just ordered one of those cameras. You are right! They are almost throw-away devices. $21, free shipping, one day only price. $31 at Amazon. I had no idea they were so cheap. Thanks for pointing this out!
There's actually so many different types of cameras available now that enable people to record experiences in much the same vein. I just saw a news clip on my local news this week in fact, where a video camera recorded a small plane crashing--the entire experience. Of course, it was inadvertent and only exciting because luckily, no one on board was hurt.
Good ideas, Naperlou. I wonder if new sensors -- and a parachute -- could help manage the descent so the camera would be less vulnerable to hard impact.
With digital cameras dropping to near throwaway prices [example] and a rocket system with almost no per-flight costs, this looks like a great opportunity both for hobbyists and for scouting and other youth groups.
What an awesome project! Our family loves model rocketry - we have countless Estes rockets we have built over the years and my son won 2nd place in the regional science fair in seventh grade with his study of aerodynamics using three different rocket configurations. I even used "How to Launch a Model Rocket" as a topic for my college speech class and we had the class outside so we could launch the rocket. This stuff is GREAT for getting kids excited about science! It's alot of fun to add bells and whistles and I admire the innovation used by Doug - we have done "still shots" in the past with a 110 camera that came as part of a kit, but nothing like Doug's accomplishment. I can't wait to show our boys and get started on this!
Doug, now that you have mastered the camera, you need to add more sensors. How about an accelerometer and a magnetometer? Then you need to record the readings. If you really want to get crazy, you could also add real time telemetry. How big do these rockets get?
Definitely adds a new level of fun and excitement to launching rockets. No doubt today's super small and portable video cameras are prime for doing something like this. Just hope your shock absorber materials can hold up--would hate to see a nice camera shattered. That would definitely impede the number of times you could launch.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
