HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 3/6  >  >>
dconner
User Rank
Iron
Re: Rocket design variations
dconner   8/14/2012 12:44:14 AM
NO RATINGS
A large ball valve should have better flow but it sounds like you are opening it manually. I don't see how you can open it fast enough. From the time my launch initiates until the rocket has separated from the launch tube is approximately 24 msec. You need a pretty quick wrist to fully open the valve in less than say 10 msec.

notarboca
User Rank
Gold
Re: Panoramic views
notarboca   8/14/2012 12:40:27 AM
NO RATINGS
@Charles Murray-- Hooray for "Rocket Boys"!  One of my favorite books and movies after "Apollo 13".  Just as an aside, I wandered into the Engineering section of a tiny bookstore in Boca Raton, FL when, much to my surprise, I found a 1st edition of "Principles of Guided Missile Design".  The very same book from which Homer and the Big Creek Missile Agency learned their fundamentals!  I bought it no questions asked.

Mydesign
User Rank
Platinum
360 degree video with transmission of images
Mydesign   8/14/2012 12:25:18 AM
NO RATINGS
1 saves
Dconner, if you are able to fix it with a 360 degree camera and sending the captured images at real time scenario with the help of small wifi transmitters are interesting. Then the project resembles like a miniature of NASA's Mars mission curiosity.

John Duffy
User Rank
Gold
Re: 360 degree video
John Duffy   8/14/2012 12:20:47 AM
NO RATINGS
I like the use of an air cannon instead of rockets.  I built a similar device, though mine is more of a giant tube.  Also, how can you determine launch speed, and can you do so using a camera not mounted on the rocket itself?  I want to see how fast the one I built shoots nerf darts.  All I know now is that they can punch through an aluminum can like nothing.  Anyway, I also like the idea of putting a camera on the rocket, as I've only seen that with commercial rockets that use solid fuel rockets to fly, not something like this.  

Mydesign
User Rank
Platinum
Re: 360 degree video
Mydesign   8/14/2012 12:20:37 AM
NO RATINGS
1 saves
Dconner, interesting project: I hope nobody misuse this project idea for spying to neighbours house or compound. I think this project is good for a short term surveillance purposes.

John Duffy
User Rank
Gold
Re: Panoramic views
John Duffy   8/14/2012 12:17:51 AM
NO RATINGS
I very much agree, though I prefer the book. 

dconner
User Rank
Iron
Re: 360 degree video
dconner   8/13/2012 11:56:53 PM
NO RATINGS
The 360 degree video technique you linked to would make an interesting image of the flight area. If I had a camera with higher resolution it would be more practical. With the camera I have the resolution seems barely adequate for the field of view that I'm using.

Charles Murray
User Rank
Blogger
Re: Panoramic views
Charles Murray   8/13/2012 10:17:29 PM
NO RATINGS
Rocket Boys is one of my favorite movies because it makes a young, aspiring engineer look like a normal child instead of socially-awkward geek. Also...the video from this article appears to be taken in an area much like Coalwood in the movie.

William K.
User Rank
Platinum
Rocket design variations
William K.   8/13/2012 9:25:27 PM
NO RATINGS
For starters, the pressure drop across that valve, as shown, is quite a lot. Substituting a ball valve will improve the range quite a bit, and also save quite a few dollars, in addition to making the system independant of external power.

I built a system that used a discarded carbon-dioxide fire extinguisher tank, rated for 1800 PSI, which provided me with a better safety factor. I use a similar bicycle tire pump, which can provide over 120PSI air pressure. This allows things to fly much higher, and makes the flights much longer.

78RPM
User Rank
Platinum
An affordable alternative to copters
78RPM   8/13/2012 4:34:54 PM
NO RATINGS
For aerial views this is an affordable alternative to Hexakopters -- just without the GPS control and RC.

For safety we could consider fiberglass and resin shield loosely placed around the launcher.  And one could wrap 20 or 30 turns of fiberglass string helically around the rocket body in both directions and secure it with glue or resin.

<<  <  Page 3/6  >  >>


Partner Zone
Latest Analysis
A Frost & Sullivan study finds that increased cyber attacks are prompting a flurry of innovative protection tools.
Devices and interconnected systems are finding a foothold not only in our homes but in mainstream organizations. Here are three tips to mitigate the risk.
What makes this movie stand out from the typical high school sports story is that the teenagers are undocumented immigrants, and the big game is a NASA-sponsored marine robotics competition. Like many other Hollywood movies, however, Spare Parts only tells part of the story. What the film shows -- and doesn’t show -- raises important issues affecting STEM education in the US.
Instead of sifting through huge amounts of technical data looking for answers to assembly problems, engineers can now benefit from 3M's new initiative -- 3M Assembly Solutions. The company has organized its wealth of adhesive and tape solutions into six typical application areas, making it easier to find the best products to solve their real-world assembly and bonding problems.
Load dump occurs when a discharged battery is disconnected while the alternator is generating current and other loads remain on the alternator circuit. If left alone, the electrical spikes and transients will be transmitted along the power line, leading to malfunctions in individual electronics/sensors or permanent damage to the vehicle’s electronic system. Bottom line: An uncontrolled load dump threatens the overall safety and reliability of the vehicle.
More:Blogs|News
Design News Webinar Series
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
12/10/2014 8:00 a.m. California / 11:00 a.m. New York
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Mar 30 - Apr3, Getting Hands-On with Cypress’ PSoC
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  67


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service