HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 2/3  >  >>
schmadel
User Rank
Iron
Re: FLIR Camera to identify hot spots
schmadel   8/13/2012 1:35:15 PM
NO RATINGS
Hi Rob,

Sorry to take so long to get back to you.

I cant' be of much help as I've never used any of these systems to discover overheated connections. The systems, like those provided by Omega, boast an accracy of about 1 degree C. This should be fine for line-of-sight instances. But for connections inside panels something like the glass covers mentioned by lynnbr2 might work.

Incidentally, the link to ElectroPhysics didn't mention anything about glass covers.

-Don

Rob Spiegel
User Rank
Blogger
Re: FLIR Camera to identify hot spots
Rob Spiegel   8/9/2012 12:32:33 PM
NO RATINGS
Those prices seem reasonable, Schmadel. How about accuracy. Do they catch most of the problems -- or potential problems?

lynnbr2
User Rank
Platinum
Re: FLIR Camera to identify hot spots
lynnbr2   8/9/2012 12:31:24 PM
NO RATINGS
an e-book on IR Viewports which includes basic design and application information is available at: http://www.iriss.com/Ten_things_about_Infrared-Windows_enquiry_form.php  

schmadel
User Rank
Iron
Re: FLIR Camera to identify hot spots
schmadel   8/9/2012 12:20:56 PM
NO RATINGS
Sorry, I mean to type "Rob" not "Bob".

-Don

schmadel
User Rank
Iron
Re: FLIR Camera to identify hot spots
schmadel   8/9/2012 12:19:39 PM
NO RATINGS
Hi Bob,

Here's a link to some optical thermometers.

http://www.allqa.com/IRcompare.htm

Some use IR lasers for the emissivity calibration, some use additional sighting lasers in the visible, and some have no lasers.

I also recal seeing our HVAC people using some with red sighting lasers to check hydronic heating systems.

These things seem to range in the $50 to $500 range.

-Don

Rob Spiegel
User Rank
Blogger
Re: FLIR Camera to identify hot spots
Rob Spiegel   8/9/2012 11:30:28 AM
NO RATINGS
Interesting, Schmadel. So these use both laser and a thermal sensor and they're still not expensive.

schmadel
User Rank
Iron
Re: FLIR Camera to identify hot spots
schmadel   8/9/2012 10:53:54 AM
NO RATINGS
The thermal system explained by lynnbr2 is a good approach. There are inexpensive point and click systems that use a laser beam to determine the emissivity at a particular wavelength, and then a thermal sensor to measure the emission near that wavelength. These hand held systems are sold for consumers for use in kitchens for measuring the temperature of a pot, or a roast, or a pot roast...  But when using a thermal approach one must have the circuit under significant power.

Jack Rupert, PE
User Rank
Platinum
Re: FLIR Camera to identify hot spots
Jack Rupert, PE   8/9/2012 10:21:46 AM
NO RATINGS
Great idea @lynnbr2.  Anything that makes safety reviews and maintenance easier increases the likelihood that it will be performed.  I like the idea of IR friendly glass which not only makes the checks easier, in many cases it means the checks do not require a process shutdown.

Rob Spiegel
User Rank
Blogger
Re: FLIR Camera to identify hot spots
Rob Spiegel   8/8/2012 1:31:39 PM
NO RATINGS
Thanks for the info, Lynnbr2. This is very helpful. What a great system. What what you suggest, it sounds expensive.

lynnbr2
User Rank
Platinum
Re: FLIR Camera to identify hot spots
lynnbr2   8/8/2012 12:13:11 PM
NO RATINGS
There is now IR-friendly glass that can be added to any cabinet to create a viewport so that the internal circuitry can be imaged by the thermal camera without opening the cabinet.

This is especially handy on Motor Control Centers that employ and interlock on the door. However, because of the increased engineering req'd and subsequent addt'l BoM cost, they are not common.

A whitepaper on this topic can be found at: http://www.electrophysics.com/nl/th0708/ 

<<  <  Page 2/3  >  >>


Partner Zone
Latest Analysis
Just how far has handheld gaming technology come? Let's take a look inside the Nintendo 3DS XL and find out.
Design, simulation, manufacturability, and prototyping: All of these phases are being pushed forward and progressively by underlying technologies.
Wal-Mart will hold its second Made in the USA Open Call July 7-8, at its headquarters in Bentonville, Ark. The event will be a repeat effort by the worldís biggest seller of consumer goods to increase the amount of US-made products it sells in Wal-Mart stores, in Samís Club members-only wholesale outlets, and on walmart.com.
From design feasibility, to development, to production, having the right information to make good decisions can ultimately keep a product from failing validation. The key is highly focused information that doesnít come from conventional, statistics-based tests but from accelerated stress testing.
Thereís a good chance that a few of the things mentioned here won't fully come to fruition in 2015 but rather much later down the line. However, as Malcolm X once said, "The future belongs to those who prepare for it today."
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 6 - 10, Building Raspberry Pi Controllers with Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service