I agree that converting machined parts to die casting usually makes sense. Because die casting tools can be expensive, it is important to first do a pay-back analysis and see if the volumes justify this change over.
In many cases we use both processes during the life of the product. When the initial design is likely to change and we need to enter the market quickly, we may start with a machined part. Then, as the design becomes stable and production volumes increase, we plan for a smooth cut-over to die cast tooling.
In most cases, casting a part versus machining it from bar stock is a no-brainer. In my career, I've only come across one part that made more sense as a screw-machined part than as a die casting. In that case, the geometry of the part made it extremely easy to screw machine. Also, screw machining allowed the part to be made out of a much stronger wrought alloy. It wound up being an 80% cost savings (from $4 to about 80¢), along with a more than 50% increase in strength.
But this is far from the norm, and as this article shows, casting is almost always much cheaper. A more interesting comparison would be between die casting and powder metallurgy. It would also be worthwhile to compare different casting processes (die casting, semi-solid processing, permanent mold, investment casting, lost foam, etc.). In addition to cost, these processes also vary in terms of the mechanical properties and dimensional accuracy that can be achieved.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
