Being a systems designer I tend to look at applications in a different light. Using an LED source of light seems a good idea, but just modulating the light as with a projector seems not so practical. Instead LED color spectrum might be modulated as to provide a light spectrum that has less reflection AND an electronic dash mounted display or heads-up projected image of the road displays a highly processed image of the road ahead. In this way a practical system treating the snow or rain as noise will show the road ahead clearly when the noise is removed by software process. This is how I would design this system, Although retired, I still can be called upon to help out with systems designed to save lives.
Interesting technology and posts. Some safety concerns: Would drivers with this technology use it cautiously (safely), since they would be able to drive in a blinding thunderstorm at high speeds? Hydroplaning, coming upon slower vehicles at a high rate of speed, etc. I question the use of daytime running lights (DRL's) in poor weather, since many drivers are not properly educated on their use. especially in rain/snow/sleet, etc. The headlights are typically always on, unless a turn signal is activated, and the headlight goes off, until the turn signal is turned off. With DRL's the driver only knows that his dashboard lights are on, assumes he is safe, and the tailights are not on. I consider the lack of tailights, when the DRL's are on to be a safety design failure that needs to be addressed.
I'd worry about the issue of obsolescence also. My TV's DLP has been a source of annoyance to me for years- not quite enough to replace it ($$$!) but enough to have to replace multiple components multiple times. Heat and vibration seem to kill the bulb- is there any of that (heat/vibration) in a car? Plus, if your concern is to "screen out" the water/fog droplets in your vision, if this is a 10-year proposition it seems to me a heads-up-video display is no farther off, and video signal processing is far more advanced than this new idea. I wouldn't expect this to make it in the marketplace - more likely we'll lose the windshield and drive by a large TV screen.
Although DLP chips curently have over 2M pixels, the chipset costs over $200 per projector. Besides cost, the key constrain in such a mega-pixel projection headlight would be the brightness. Currently 4000 lumens is considered to be "bright" for a DLP data projector commonly used in conference rooms. A projector headlight for cars would have to be many times brighter than a data projector to illuminate the road ahead for the same distance that current headlights support. Given all the additional heat that will be dissapated from such a bright light source, I don't know if DLP chips could handle it without extensive cooling measures.
The concept seems to have a flaw, as the reflection has to take into account the users (driver) eye location. If you move your head, that changes. This would require an eye position sensor and modifcation of the control parameters to account for movement, making calculations even more complex. Between sensing, calculating and controlling there are too many potential failures to achieve robust reliability.
Ultimately the effort and cost would seem to be a lot for a small benefit over just using the low beams and slowing down. If it did manage to work sometimes, it would soon degrade driver skill, and when the inevitable failure happened, the results would be worse than before.
Good point about all the gyrations a technology has to go through in terms of being properly vetted by a safety board. Even so, 10 years is such a long time--given the state of technology today, it could be obsolete by then.
Good point about all the gyrations a technology has to go through in terms of being properly vetted by a safety board. Even so, 10 years is such a long time--given the state of technology today, it could be obsolete by then.
Even if the equipment could be just developed in a profitable way, there are a lot of parameters to control and logical problems to solve during the software programing. By the time a solution has been implemented which only works in test enviroment, with homogeneous and static background, and a small deep of falling drops. I think the final solution needs a video signal processing much more complex to deal successfully with real situations, as the great deep of field of falling drops or dinamic and much more random and irregular background. Even the water over the surface of the camera lenses (don´t forget that it's raining!) must be taken into account, getting very difficult to process distorted pictures.
Hopefully that is not just pie in the sky. Such as in other fields, I think though we could have the technology, we still don't know how to use it efficiently and to trasmit a final solution to the market.
The Digital Light Processing (DLP) technology was invented at Texas Instruments back in 1987, so this application has been technically feasible for 25 years, but just now being demonstrated. Another 10-years to commercialization sounds long, but in the grand scheme of things it sounds about right. Especially if you are talking about a safety device that must be developed and then tested and approved by the NHTSA.
Heck... I'm still waiting for my flying car and they were invented in the 1950s...
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
