HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Rob Spiegel
User Rank
Blogger
Advances in quick coupler materials
Rob Spiegel   7/23/2012 3:03:25 PM
NO RATINGS
Sounds like Flow-Rite had made some advances in the materials used in quick coupler materials. I can imagine these couplers take a beating outside in the Phoenix sun. 

Nancy Golden
User Rank
Platinum
Re: Advances in quick coupler materials
Nancy Golden   7/23/2012 10:53:21 PM
NO RATINGS
I agree Rob, I really like Flow-Rite's innovation and careful consideration of both environmental factors and seeking ways to error proof connections. The Texas sun is brutal as well - I am wondering how long one can expect the UV protection to hold up and what the specs are for that type of testing...we have UV protected furniture grade pvc pipe for some of our horse obstacles to protect against degradation but extended exposure will eventually have some effect. Of course horse obstacles aren't made to withstand acid so I am guessing these couplers are pretty tough in comparison.

I also really like their ease of use - it is so nice to be able to carry out a task without having to wrestle with the connectors first!

Rob Spiegel
User Rank
Blogger
Re: Advances in quick coupler materials
Rob Spiegel   7/25/2012 1:20:18 PM
NO RATINGS
I would imagine the heat itself would have a long-term effect on the hoarse obstacles. So even if they're UV protected, they still may suffer from getting baked in the heat.

Nancy Golden
User Rank
Platinum
Re: Advances in quick coupler materials
Nancy Golden   7/25/2012 2:14:02 PM
NO RATINGS
Probably so, Rob. The nice thing about our obstacles is that they are portable - they are easy to put up and break down in five minutes or less. If riders store them in their duffle bag out of the sun after using them - they should last for years. I think anything left baking in this heatwave will eventually have an effect. Same problem leaving them out in cold weather - pvc is known to get brittle.

Rob Spiegel
User Rank
Blogger
Re: Advances in quick coupler materials
Rob Spiegel   7/26/2012 1:41:58 PM
NO RATINGS
Good point on the cold weather, Nancy. It could be that the repetitive swing from hot exposure to cold exposure breaks down the material. So UV resistance may not be enough. In my New Mexico backyard, plastics don't last long. While the temperature may only be 95, the sun beating on the plastic goes to a much higher temp. 

Nancy Golden
User Rank
Platinum
Re: Advances in quick coupler materials
Nancy Golden   7/26/2012 2:24:22 PM
NO RATINGS
I was just in Clovis a couple of weeks ago, Rob. It sure was nice - much cooler during the day and especially in the evenings than Texas at the same temperature. I think Texas humidity is a factor as well. Just goes to show that when you are designing for outdoor environments, there are all kinds of variables that need to be considered! Location, location, location!

Rob Spiegel
User Rank
Blogger
Re: Advances in quick coupler materials
Rob Spiegel   7/27/2012 12:28:34 AM
NO RATINGS
Yes, Nancy, location is everything. a couple months ago there was a discussion about problems with a European car that was not holding up in the desert Southwest. While the car maker was happy to sell cars here, they were not testing their cars for our climate.



Partner Zone
Latest Analysis
Take a look at the top 20 US undergraduate engineering programs. Then tell us -- did your school make the cut?
Producing high-quality end-production metal parts with additive manufacturing for applications like aerospace and medical requires very tightly controlled processes and materials. New standards and guidelines for machines and processes, materials, and printed parts are underway from bodies such as ASTM International.
Engineers at the University of San Diego’s Jacobs School of Engineering have designed biobatteries on commercial tattoo paper, with an anode and cathode screen-printed on and modified to harvest energy from lactate in a person’s sweat.
A Silicon Valley company has made the biggest splash yet in the high-performance end of the electric car market, announcing an EV that zips from 0 to 60 mph in 3.4 seconds and costs $529,000.
The biggest robot swarm to date is made of 1,000 Kilobots, which can follow simple rules to autonomously assemble into predetermined shapes. Hardware and software are open-source.
More:Blogs|News
Design News Webinar Series
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
5/13/2014 10:00 a.m. California / 1:00 p.m. New York / 6:00 p.m. London
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 8 - 12, Get Ready for the New Internet: IPv6
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service