I would think a guy who has been through the development process for a vehicle would have a better sense of the scale of this proposition.
In addition to the technological and infrastructure hurdles this will require the development of many all new platforms to replace current IC engined offerings.
These will not be undertaken simultaously-no company has the resources to do that. There are perhaps 250 different models on the US market. To develop all electric equivalents of even 10 percent, if the programs were started today, would require an easy 5 years. To develop electric equivalents that embody the capabilities of the current IC products, in a form acceptable to the public at large, at a price that is both acceptable to the public and profitable to the manufacturer...no way.
Flat nonsense in my not particularly humble (at the moment) opinion. ;^)
I beleive your right, Rob. There are big opportunities still undiscovered in gas efficiency. We are only at 30 - 40 percent at best. Literature says we can gain 35 percent alone if we stop thrashing pistons back and forth.
That's right, Chuck. Given the battery wall EVs seem to be hitting, it could be internal combustion efficiencies could make gas engines compelling. Right now, powerful EVs are very expensive. Do you know whether the highly efficient gas engines are significantly more expensive than the less efficient versions? At some point, the efficiency gains get spread across all models.
Yes, Rob, internal combustion engines are advancing at a good clip. The Chevy Cruze Eco does a good job of going head-to-head with the Volt in some respects. And as you and I have commented elsewhere, U.S. oil production is having a bit of a renaissance right now.
I, too, admire Musk and his willingness to take on big, audacious design challenges, JimT. But when it comes to an assessment of battery technologies, he said it quite well: "There are few industries with more BS than the battery industry."
While Musk may indeed be sufficiently genius to dock with The International Space Station, and even design, build and mass-distribute fully electric cars, he cannot control his competition's ambitions unless he puts them out of business. With about 47 other global automobile manufacturers, THAT would be a truly remarkable achievement.
And if the growth curve of technological elements is any reference map, I can report first-hand that the battery advancement curve is the flattest; the dead-last technology advancer in the past 25 years behind other tech curves like silicon miniaturization, memory density, displays, materials, RF protocols, and many others. Battery chemistries and efficiencies have not seen that "break-thru" every other tech curve has experienced.
While I admire both Musk's achievements and his vision, unless TESLA inc. is on the verge of battery chemistry breakthrough, I would not 'back' his bet.
Nice article, Chuck. I think one of the developments Musk doesn't anticipate in his projection is advances in the efficieny of the internal compustion engine. We're likely to see some profound advances in the IC engine at the same time the EV market struggles with batteries.
There are no breakthroughs on the horizon for all electric vehicles that would justify Musk's statement. Perhaps he has an inside edge, but I doubt it. Fuel cells could help, but oh they really are not practical. By practical, I mean at a price point that can be justified. Don't get me wrong, I would like to see it. But, it has to be practical to make the type of market inroads Musk is talking about.
I still think that gasoline vehicles can improve by orders of magnitude. We could eaisly lower our fleet consumption of gasoline by just getting rid of SUVs. I remember when, after the oil shocks of the 1970s most car ads mentioned the car's coefficient of drag. Then we got the SUV craze, and the fleet average went down considerably. Engine technolgy got a big boost in the 1990s, but we have had no substantial increases for twenty years. Just now we are getting new technologies that are helping to increase mileage. On the other hand, car companies are concenttrating on gettiing more power out of the same engine rather than making smaller engines of the same power. There is also natural or LP gas. I have heard reports from people who have experienced this in other countries, where they are common that are very interesting. On guy mentioned that they had a dual fuel vehicle. They filled up the LP gas tank, drove 800 miles, and still had fuel left over. That is something we have to research. And the infrastructure for that is easy and less of an impact than oil processing.
There are lots of technology choices out there. Full electric still has a way to go. Perhaps Tesla should bring battery technology in house. They would have a motivation to make it work and a ready market. Just a thought.
I don't think most people will want to drive 2-400 miles (I'm being generous) and need a fill-up and want to sit around for hours while your car recharges just to go another 2-400 miles to do it all over again. I won't! And I bet once the novelty wears off others won't either.
There is so much petrol in the ground, and so much engineering waiting to be done improving engines, that it is government-driven silliness to think we should leave this technology behind. Be real!
I know the pantywaist, Al Gore worshiping, California hippy grubbing, milksop, momma's boy, namby-pamby, 98lb weaklings (yea I'm baiting you) will love one, since they only drive from their commune to the "farm," but the rest of us will want reality. I like the idea of hybrids, but show me the mileage!
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.