Corrosion, and with it, chipping and painting, is a huge problem (as every bluejacket knows) If this is anywhere close to the solution to an age-old naval problem the Navy has advanced a great deal towards cost savings.
Corrosion is expensive. The cost of corrosion to industrialized nations is about 3 percent of GDP. In the United States that adds up to $2-4 trillion per decade, which equates to rebuilding Hurricane Katrina-scale infrastructure three or four times.
Yes, corrosion is expensive, especially when you're dealing with big things like ships, planes and vehicles for the military, manufacturing equipment, and industrial pipelines. It's important to be pre-emptive when it comes to corrosion prevention or else you could wind up spending a lot more than you'd like. You can see how products like moisture barrier bags and vapor corrosion inhibitors protects airplanes and equipment:
Mydesign: I'm not aware of any production military submarine hull that is made of anything other than high strength steel... The Russians used titanium alloy hulls, but no one uses "sheet metal" or "fiber plates"... These materials would not be useful in this application... Do you have a specific example of a submarine that uses the materials you mentioned?
Not sure I see how your comment is anywhere close to relevant... I didn't see any mention of how much the team spent on the project... My (real life) experience with NRL is that most of the projects there are run on a shoestring, and many of them yield useful results that transition very quickly into the commercial world (just like all of the other national labs)... This project translates into commercial application as well, potentially saving commercial shipping companies billions over the lifetime of their fleets... This translates into economic benefit for a VERY large group of people...
@KennJ: $3 billion is the total annual cost of corrosion for Navy ships. It includes the costs of corrosion prevention, R&D, maintenance, and losses due to corrosion. For the entire Department of Defense, the cost of corrosion is about $22.5 billion.
@Mydesign: There is no such thing as a corrosion-free metal. (You might say that polymers and ceramics are "corrosion-free," but that doesn't mean they are immune to environmental degradation). I strongly doubt that anyone in any country is building a submarine or any other marine structure without some kind of cathodic protection system.
"The Navy spends nearly $3 billion annually to fix corrosion damage of ships."
Elizabeth, that's a huge amount and comes approximately equivalent to the cost of a submarine. But many of the submarines of other countries are made of corrosion free substances like sheet metal with ionized coating, fiber plates etc. Why still US navy didn't use such corrosion free metals.
Nice story, Elizabeth. It's quite surprising that the military spends $3 billion each year to fight corrosion. Good to see there is clever new technology to help fight the problem.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
