Hi - some clarity on our Digital Materials: Digital materials are composite materials made of 2 physical cartridge base materials. The two Objet model materials are integrated in specific concentrations and structures to provide the desired mechanical and thermal properties; enables close simulation of the target product materials. Digital Materials are generated on the fly during the printing process using a software algorithm which defines the jetting pattern which results in the composed materials structure. Digital materials do not exist as cartridge-based materials but only in the resulting model or part.
That's my impression, too, Rob. Objet has been quite consistent in its drive to make more materials available for its 3D process, to serve the need for function as well as for form and fit, in prototypes and models.
"Digital" materials is the new "i" anything, strictly a marketing term. These materials are manipulated by an electro-mechanical device controlled digitally and the shape that it making arose from a digital file.
Semantic argument aside the technology is fascinating and the proliferation of materials that are compatible with these 3-D printing processes can only serve to make the life of the design engineer simpler. Printing a 3-D part is a first step in the evaluation of a design, does it look, fit, etc. as I expected. If so, good, I can make a more functional prototype with more appropriate materials, if not, good, I didn't spend too much money or waste too much time.
I look forward to the growth of this technology, but I won't be calling these 3-D inks "digital materials".
Beth, thanks for that succinct explanation. A production sample/working prototype made with actual materials would be the best test, but that's not always possible, due to the cost of tooling alone, not to mention the high cost of small, non-production amounts of materials, for example, or the time involved. Which is why the 3D prototype/model industry got started: saving time and money and getting a lot closer to an understanding of the end-product.
There seems to be some semantic confusion. Form and fit are more than visual--if a part fits with another part, that's not visual, that's mechanical. To do so, it must be the right form. Functionality of a part is only visual if the part's looks have something to do with its function. It's not the materials that simulate anything, it's the part made with those materials, which with 3D technology can be a lot more than a mockup.
I'm not sure these 3D printed prototypes, digital materials or not, are meant to be a full-on replacement for building a real working prototype with real materials. I think they are meant to be part of the process and help eliminate the need for building so many different variations of physical working prototypes, which can be costly and time consuming. These methods are far more efficient and less expensive compared with building expensive tooling.
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.