Hi - some clarity on our Digital Materials: Digital materials are composite materials made of 2 physical cartridge base materials. The two Objet model materials are integrated in specific concentrations and structures to provide the desired mechanical and thermal properties; enables close simulation of the target product materials. Digital Materials are generated on the fly during the printing process using a software algorithm which defines the jetting pattern which results in the composed materials structure. Digital materials do not exist as cartridge-based materials but only in the resulting model or part.
That's my impression, too, Rob. Objet has been quite consistent in its drive to make more materials available for its 3D process, to serve the need for function as well as for form and fit, in prototypes and models.
"Digital" materials is the new "i" anything, strictly a marketing term. These materials are manipulated by an electro-mechanical device controlled digitally and the shape that it making arose from a digital file.
Semantic argument aside the technology is fascinating and the proliferation of materials that are compatible with these 3-D printing processes can only serve to make the life of the design engineer simpler. Printing a 3-D part is a first step in the evaluation of a design, does it look, fit, etc. as I expected. If so, good, I can make a more functional prototype with more appropriate materials, if not, good, I didn't spend too much money or waste too much time.
I look forward to the growth of this technology, but I won't be calling these 3-D inks "digital materials".
Beth, thanks for that succinct explanation. A production sample/working prototype made with actual materials would be the best test, but that's not always possible, due to the cost of tooling alone, not to mention the high cost of small, non-production amounts of materials, for example, or the time involved. Which is why the 3D prototype/model industry got started: saving time and money and getting a lot closer to an understanding of the end-product.
There seems to be some semantic confusion. Form and fit are more than visual--if a part fits with another part, that's not visual, that's mechanical. To do so, it must be the right form. Functionality of a part is only visual if the part's looks have something to do with its function. It's not the materials that simulate anything, it's the part made with those materials, which with 3D technology can be a lot more than a mockup.
I'm not sure these 3D printed prototypes, digital materials or not, are meant to be a full-on replacement for building a real working prototype with real materials. I think they are meant to be part of the process and help eliminate the need for building so many different variations of physical working prototypes, which can be costly and time consuming. These methods are far more efficient and less expensive compared with building expensive tooling.
@Ann-Form and fit are visual. How can digital materials in a 3D mock up simulate function?
Maybe I'm old fashioned but testing a sample made with a material that simulates rubber is no match for a test on a sample made with the actual rubber that will be used in production.
Does the simulated function just give an estimate of performance in order to speed up the development process?
The video says a lot, Ann. This seems like a logical step in the development of 3D printing, that companies would begin to compete on the availability of materials.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
