Hi Beth, the computations are performed by parallel processing on twelve HP DL360R07 Xeon X5650 2.66 GHz processors with 96 Gb RAM, although the full range of RAM memory has not been needed yet for this study - this will only be needed when we extend the group of cyclists to about 15-20.
Thanks for the update on the project and for sharing your work with us. Very, very interesting and sounds like there's more to be done. Can you give us an idea of what kind of computing cluster is churning through all these calculations over the last six months?
Thank you for the comments and thanks Beth for the very nice article about our work. Here, I would like to acknowledge the other members of the team:
- Dr. Thijs Defraeye, Leuven University, Belgium - Dr. Erwin Koninckx, Flemish Cycling Union, Belgium - Prof.dr. Peter Hespel, Bakala Academy - Athletic Performance Center, Leuven University, Belgium - Prof.dr. Jan Carmeliet, ETH Zurich, Switzerland
Thanks for the question. We never counted the hours, but we have been working on the aerodynamics of single (isolated) cyclists since 2006. This studied was funded by the Flemish Cycling Union. It was a full-time job performed by postdoctoral fellow Erwin Koninckx for one year and a half. Also Thijs Defraeye (PhD student at the time) worked for almost 50% of the time during more than two years on this project. Both were supervised by Peter Hespel, Jan Carmeliet and me. Erwin was later hired by the Flemish Cycling Union and is working there now. Erwin was/is the perfect man for the job: he has a double master degree, one in engineering and one in biomedical kinesiology, as well as a PhD in biomedical kinesiology.
The second study, i.e. on the groups of cyclists, was started in 2009. I started this study as a personal initiative because I wanted to investigate what would happen with groups of cyclists. There was no funding for this initiative, but luckily I could count also on the enthusiasm and support from the previous collaborators: Erwin, Thijs, Peter Hespel and Jan Carmeliet. Also the wind tunnel team at Dutch-German Wind Tunnels was enthusiastic and gave us some free testing time. This study - with some interruptions due to other tasks - is still going further today. I think I have spent, overall, more than 6 months full time on this second study. But much of this was spread over the past three years, including many weekends and evenings. Although our computing cluster has been calculating almost continuously in the past 10 months, and is still doing so today.
I was involved in the controls for a new soft drink bottling line last year. It was fascinating to watch 2-liter bottles move from the blow-molder to the filling machine on air-veyors. The bottle is supported by its neck, and the air-veyor blows air downstream, providing an almost frictionless conveying means. The bottles move very fast.
While the transport alone was neat to watch, the fascinating part was what happened to the bottles. Trailing bottles would catch up to the one in front of it, until about 6-8 bottles were moving along in a single slug. Physics and geometry created that optimum slug. No other bottles could catch up to it, so another slug would form behind it.
I would imagine there is an optimum cycle train as well, for a given average cyclist mass, speed, and cross-sectional area, not just the benefits of a pair of riders. That would seem to be the next path to explore.
Yes, it make it more complicated, but this type of complication is usually welcomed in competitive sports. Part of the competition is off-road, where teams study everything little item that can afford an advantage.
That is if the racing teams actually make an investment in this kind of research, but you're right. It does inject a level of complexity and cost into the equation. Then again, competitive sports teams make this kind of investment all the time. Professional football teams do all kinds of analysis and simulation, golf professionals do, and the list goes on.
Well, this is great work. It is an interesting use of CAE to understand what is really happening in a sport. A lot of this type of study is done in swimming.
The only reservation I have is that it makes the whole thing more complicated. It will increase the cost of fielding a team since they will now have to purchase the CAE software and all the equipment for measuring athletes.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
