Great project by John who is masterful in High Voltage Electronics. Gadget Freak projects are excellent teaching materials for all levels of science and engineering classes and student. Keep up the great work Design News staff.
You do not need a light sensor to electronically detect the sparks. Do what they do in a Geiger counter. Connect a capacitor from the ballast resistor (the metal plate in this case) to a small one-transistor amplifier. Each spark would would produce a pulse from the transistor that could be counted by a microcontroller or other counter circuit. There would not be two sparks simultaneously. Once a spark starts, the voltage is too low for another to begin. If two particles hit at EXACTLY the same time, the one with the most energy would prevail IMO. It should therefore, be an accurate count of the number of sparks.
I would move the ballast resistor and the capacitor to the grounded side of the HV power supply, however. Less stress on the coupling capacitor and the connected transistor.
Al;ha detection useless? Unless you consider Ernest Rutherford's historical Experimenmt that led to our modern nuclear atomic theory. This was based on the production and detection of alpha particles. Alpha detection through ionization and sparks has been insespensible throughout the development of modern atomic and particle physics. Please. Mr shjacks, do your homework before picking up your pen.
Hi. This was great. Very Nostalgic for me. I haven't seen a spark chamber at work since the 1960s worlds fair in Seattle.
Of value? Well, that depends on whether or not you do particle physics. I can see I will have to build one to impress my 4 year old grand daughter. Just have to figure out the safety protocols for little fingers and 8KV, eh.
You know someone has re-spun the classic cloud chamber to use Peltier coolers instead of dry ice: http://www.nothinglabs.com/cloudchamber/
This spark detector design is different from the Willis design, particularly in the size of the ballast resistor (500 ohms vs "several megohms"); and explanations for the changes?
Good thinking, MrBill. All of these Gadget Freak submissions are good teaching tools. Many of them are even submitted by students. We've had a bunch submitted by college-level engineering student teams. Recently we had a submission by a 15 year old.
Dead on that the term "useless" is inappropriate in this forum. While watching the video I was thinking about the possibility of adding a light sensor and micro to act as an event recorder. I have piles of what others would consider useless devices, but I learned from each project. In my life TV and sports watching are useless, but I would not wish to stop anyone from doing so. I too want to thank John for taking the time for his contribution in both hardware and the video production.
"Useless" is a relative word and is very inappropriate for this forum. Establishing the uselessness of a demonstration, experiment or idea is impossible - if the demonstration inspires just one person to build off of it somehow, it is not useless.
In a related story, apparently some in Pakistan don't think finding the "God particle" is all that amazing or important. It is a very useless endeavor in their minds. Heck,some members of our own Congress think that scientific data is useless and that science has no role in public policy.
So bravo to John Iovine for taking the time to investigate and build a device that addressed his curiosity.
They love sparks and noise and yes a little danger. This project is a great way to introduce the alpha partical. Inserting paper between the alpha source and the detector would be a good demonstration of the size of the alpha.
While a cloud chamber is certainly a good demonstration tool, its use is more difficult because dry ice is required. In addition, cloud chamber has a limited field of view and difficult to see at a distance. Using the "spark detector", in a darkened room, the entire class could see the effect.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
