Mike J, you're right. Every interesting development in robot R&D is being researched by more than one organization, and there are a huge number of robot labs in universities. For every subject like this one there's usually a handful of different approaches, too.
"The challenges are numerous. Interfaces must be structured so nerve fibers can grow through. They must be mechanically compatible so they don't harm the nervous system or surrounding tissues, and biocompatible to integrate with tissue and promote nerve fiber growth. They also must incorporate conductivity to allow electrode sites to connect with external circuitry, and electrical properties must be tuned to transmit neural signals."
Charles exactly what I was thinking.. if it was possible to somehow wire the finger/arm such that the signal would stimulate the brain in such a way that it would think the person was actually touch something.Charles exactly what I was thinking.. if it was possible to somehow wire the finger/arm such that the signal would stimulate the brain in such a way that it would think the person was actually touch something. If they don't have this capability now, I'm sure it will be just around the corner.
Chuck, prosthetic limbs were included by the researchers as a possible application for this. But sending signals to the brain would be a whole different set of hardware and software.
This looks like an intersting development in sensors, but, beyond the $15000 cost of the development kit, you're going to have to invest a lot of time towards developing algorithms to interpret the sensor signals.
From an automated grapsing perspective, I can imagine a system that uses the BioTac signals to detect slippage of a grasped object and automatically tighten the gripping force to compensate. This would allow lower grasping forces in mobile robot manipulation tasks where overly tight grasping is the norm.
Ann, a few years ago, doctors at the Rehabilitation Institute of Chicago were talking about adding touch to prosthetic limbs. I wonder if this would make it easier to do that, or if it would even be possible to send the signals from this finger to the human brain.
Future generations of this sensor, combined with sensors for temperature and pressure will give a very close approximation of human sensorium. Whatever sort of actuators available at that time (Festo does have some interesting ones now) will provide movement. Detxerous, sensing fingers are the result. Sensors and actuators will likely be connected to a local network router in order to simplify the trunks feeding back to the central core of the robot.
Human-like manipulators will make for very, very useful general-purpose robots, ones that don't need custom tooling to perform a job.
Those applications make sense, Ann. I would imagine there are tons of other applications as well. This technology would probably be useful in search and rescue as well as military applications.
Nice article and video, Ann. As the narrator notes, ultimately, the data from the robotic touch has to get between the ears of the user. I would think there is a wide range of uses for this technology.
naperlou thanks, those are good examples of how this technology could supplement existing inspection technology. Same goes for various robotic handling and sorting functions, some of which also already use machine vision and could be supplemented by robots with a sense of touch.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
