Warren, this is also a good idea, but moving this huge load over piezoelectric substance is feasible? What I meant is a different idea. Any way wheels are rotating, so some electro-mechanical mechanism to generate energy, which can used for the internal usages like lighting, working of a/c etc.
Thanks ttemple for the comments about the difficulties of heat harvesting. In the IT environment, there was a lot of talk about harvesting waste heat from data center equipment a few years back after the info came out about their high amounts of energy use, and about the proposed extension of Energy Star-type ratings to commercial equipment. So I was wondering about the in-plant solutions; larger-scale "solutions" like dragging icebergs around just sound ridiculously complex, not to say unwise from a climate standpoint.
I have seen cases where manufacturing plants effectively move "process heat" around to reclaim it. I have never seen it on a very meaningful scale, however. Even in the case where there is excess heat, and a demand for heat under the same roof there are difficulties moving the heat around. In the cases I am thinking of, heat pumps are involved in concentrating the energy enough to effectively move it from areas that are too hot to areas that are cool.
An example is an automotive plant that has heat treating ovens at one end, and space that needs heated in the winter at the other end of the building. They use heat pumps in the heat treat area to concentrate the energy, and pipe it to other areas of the building that reclaim the heat. I believe they also use some of the heat in other processes within the plant that need heat.
The issue with energy in the form of heat is the difficulty in transporting it to where it is needed. (A few hundred feet is one thing - miles is another) If it were easy, we wouldn't need fossil fuel to heat houses. There are always places on earth that are too hot, and other places that are too cold, so we would just move the heat where we want it. Unfortunately, the means does not currently exist to effectively do this. Attempts to drag icebergs around is about as close as we have come.
A mechanism to efficiently transport energy in the form of low grade heat would be a game changer for mankind.
Although I'm not personally aware of whether those efforts are ongoing in any particular application, Ann, I'm sure our readers are. It makes sense that it would be ongoing in a number of different industries.
Energy dissipated as heat is wasted all the time in mechanical and electronic systems. I'm curious about efforts to recapture that heat, which were being discussed a few years ago, for example, in server farms and various IT environments. Chuck, do you know if those efforts are still ongoing in any industry?
The trains that I have watched come into the local train station all brake MUCH faster than they accellerate as they leave. Most traffic brakes much harder than it accellerates, except for drag racers. Even circle track cars seem to brake much harder than they accellerate. Not because they must, but because they can. And the biggest limitation on regenerative braking is putting the energy someplace. I can draw about 700 amps from a standard car bettery for cranking, but putting 700 amps into it would cause a lot of damage after a short time, I am sure.
The accereration and regeneration amount is set by the motor specs and are the same in most cases, just reversed.
A123 batteries in a 150lb pack can put out, take back 450hp, 350kw. Most battery can charge at the same max rate of discharge.
Piezo isn't viable as it sucks power from the train as extra drag to make the rails move and not eff either so you get back probably 10% vs 50% in braking style regeneration after losses.
Panic stops are rare and frowned on as they rapidly wear the rails and make flat spots on the wheels so not a regen issue. Trains run the same thing day after day by the same people on the same track usually so surprises are rare.
Much of New England is electric and all going through NYC by law are.
If the US was smart they would nationalize the rails, upgrade them to electric and charge by the mile, weight givng credits to pay for buying the rails from former owners. A kind of interstate or the rails. The fiasco we have now of many hundreds of company lines and too few double, 2 way tracks has seriously effected our economy, shipping costs and time to get from one place to another.
You'd be surprised TJ. The container pictured is a high cube 20' unit. These containers can be up to 53' in length and can be utliized in a number of ways. My company does this type of integration in ISO containers:) I'v seen that unit up close, it's a good looking unit and some innovative technology
Digital healthcare devices and wearable electronic products need to be thoroughly tested, lest they live short, ignominious lives, an expert will tell attendees at UBM’s upcoming Designers of Things conference in San Jose, Calif.
Designers of electronic interfaces will need to be prepared to incorporate haptics in next generation products, an expert will tell attendees at the upcoming Designers of Things conference in San Jose, Calif.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.