I can remember, and you probably can too, when no engineer would be caught dead using a Mac, let alone singing its praises. Good to see that times have changed.
I was one of those die-hard Windows users. My lab has Win XP computers for engineering and design software, but for everyday work, the Mac does the job.
I know there are things you can't do on a Mac, due to the lack of engineering and design app software. But when it comes to basic functions and tasks than can drive a user nuts--or not--and waste time--or not--Mac wins hands down. I've even been told this by some (pleasantly surprised)die-hard Windows users after they bought a Mac for their kids.
I bought a USB audio adapter so I could use a standard computer headset with my Mac for Skype calls. The Mac audio input expects an active audio signal rather than just a microphone. I plugged in the adapter and had a headset up and running within about 3 minutes. Glad I didn't try that on my Windows PC. But wait, I did...
I wanted to use the PC for Skype, but it has three sound-card options (it came that way) and I could not get the microphone AND the earphones to both work on the same device. I used the system tools for Win XP without success and tried troubleshooting on my own. The small plug-in adapter cost about $20 and was worth every bit of it. The Mac is a gem.
Your description of Windows' typical cluelessness about drivers was very funny. According to programmers who worked on kernels for the pre-X Mac OS (back in the PC Paleolithic), due to its mouse-based GUI, among other things, the Mac OS was originally designed to recognize peripherals as an integral part of the system, instead of treating them like alien invaders.
I'm not sure that tool comes for free. When I looked into Windows 7, I found only the "Professional" version at $US 199 includes the capability to run in XP mode. If you know another source of such a program, let us know. Thanks.
FWIW you might try Windows 7 "XP Mode", a free tool from MS to run XP stuff under Win7. I was able to get an old HP USB scanner driver to work by doing so.
I might switch to Windows 7 when I need a new PC, but I don't want the hassle of getting replacement software that will run under Win 7. I ran the Windows 7 Upgrade Advisor and many of my programs will run, but according to the Advisor, I would need to reinstall them again. That's too much of a pain. The Freescale Robot caused the only USB-driver problem in some time and I believe the problem stems more from a lack of follow-up and information from Freescale than anything else. So for now, it's Windows XP.
I have upgraded the OS on my Mac several times without any problems and USB devices install without any difficulty. I discovered recently that the audio input on Macs requires a signal input rather than a microphone connection. For about $7 I bought a USB headset adapter that Mac OS immediately recognized and worked with. If I could find all the engineering and design software I use in Mac versions, I'd dump Windows immediately.
I'll continue to look into the problems with the robot and expect to try it with two other Win XP PCs in my lab. But this effort has a low priority for now.
Hi, Beth. The Freescale robot serves mainly as a teaching tool, but because it uses the Tower-family boards, engineers can "graduate" and learn more about these boards and how to use them in an embedded system. The Tower board in the robot provides eight servo outputs, so students can do more than make the robot walk.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
