Good point, Ann. I don't know if Chris went online to see what other owners were experiencing with this lawnmower, but I would suspect there is a forum with a thousand complaints. This sounds like a design flaw rather than an individual problem.
It seems like all the "Fixed by Clever Humans"--oops, I mean, "Made by Monkeys"--columns are about products that were never tested, or at least, never tested in any way that's relevant to their actual use.
I have a self-propelled Troy-Bilt walk-behind mower. In 7 years of ownership, I had to replace the rear drive wheels, the front axle, front axle support bushings (three times!), rear drive transmission, and four drive belts. The paint flaked off the inside of the deck years ago. To be fair, when it is working, it works well, but I have invested 50% of the purchase price to keep it running for the last 7 years! More evidence that the monkeys work for Troy-Bilt (and their parent, MTD)! I will NEVER buy a Troy-Bilt product again!
Problem with a warranty claim, is you will only get the product repaired to the faulty design standard.
There are many times when I regard what I buy as not so much a product, more a set of parts from which to assemble something better.
For an item this expensive with only 7 hours of use, it surely would have been covered under warranty to troubleshoot the bad design. There may have been a technical bulletin explaining the issue that the repair tech could have reviewed.
Yes, Ann, another "Fixed by Clever Humans" column. I do wonder, though -- did the manufacturer bother to test this design? From what I'm reading here, the design flaw could have happened on any or all of its mowers. Shouldn't they have picked that up in test?
I have found numerous opportunities to choose better bolts, knobs, transistors, resistors, capacitors, etc. on various pieces of equipment in my days. And certainly, in many cases, I could have written a better manual after spending only a few hours with a product. I could certainly spell better than they did.
We shouldn't expect perfection with most devices. They only had to meet spec for marketing. He was lucky to have a lift and to see the problem. I wonder how many of these were sold off on Craig's List to some unwary soul who spent a fortune on repairs never to be satisfied?
Looks like another "Fixed by Clever Humans" column. I especially like how the author changed various dimensions, like distance from tensioner arm to bolt head and belt length. I agree with Nancy, he should have been the design engineer for this product.
Good point, Nancy. This blog could just as easily be a Sherlock Ohms entry, since Chris went through the process of identifying the problem and coming up with a long-term fix.
Chris - I admire your tenacity in troubleshooting the problem. It seems that you should have been the design engineer on this mower. It also makes me wonder how much testing is done during the development stages for these types of products. It seems like this problem should have been recognized during product development.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
