I remembered Forrest Mims describing his solar tracking device in the defunct Science Probe Magazine. It consisted of an analog circuit driving a dc motor. The detectors for the circuit were solar cells attached to the dc motor. Based on the sun's position, the motor will point the solar cells in the direction of the sunlight. As explained and demonstrated in this project, a small microcontroller can enhance the performance of such a basic sun tracking device. Cool project!!
Here in Europe, I would choose a microcontroller with a built-in RTC (real-time-clock). Knowing time and date, I can predict when the sun appears on the horizon, the elevation and when it disappears again in the evening. On cloudy, rainy days it might be useful not to switch on the servos. However, if the sun shows some erratic behavior which makes it necessary to follow it by an X/Y-tracker, your circuit might be better... (but I've never seen this on our planet).
I have my old design for sure. All this interference and "chatter" can be eliminated by integration and delay of a signal that is usually splendidly done by installing a capacitor in the output driving circuit.
I mostly agree with you. In fact, I tried connecting four photocells to four opamp comparators. I ran the non-inverting of one into the inverting of the next one in a ring. The binary search for right/left, up/down didn't work. It kept getting distracted by clouds and rocks and shadows and the motors went wild like a hound dog on a scent. If anyone has an efficient analog design, I'm interested.
But, again, I'm disappointed that everyone focuses on the solar application -- but then I guess I should have changed the title. The circuit and program is really about multiplexing in general. When I did aircraft flutter tests back in 1980 this little circuit would have been more powerful than the DEC PDP 11/70 we were using.
I tried to understand "almighty" processors being used everywhere. From MP3 players to refrigerators and even coffee machines.Why do we love to complicate things? I agree with John E , who described a design similar to the one , that I published (with Bob Pease blessing) about 30 years ago in Popular Electronics. Hundreds of trackers are using it and it has only 4 photo resistors and simple differential-servo system.I had tons of positive feedbacks and never heard anything negative on it , except that some people did not understand how servo works and what kind of transistors to use on an output.Sixty phototransistors?Isn't it a bit of overshoot?It would be great for navigation , but to move solar panels we do not need such a sophistication.Just my humble opinion.....I always loved analog.
Some cars are more reliable than others, but even the vehicles at the bottom of this year’s Consumer Reports reliability survey are vastly better than those of 20 years ago in the key areas of powertrain and hardware, experts said this week.
Many of the materials in this slideshow are resins or elastomers, plus reinforced materials, styrenics, and PLA masterbatches. Applications range from automotive and aerospace to industrial, consumer electronics and wearables, consumer goods, medical and healthcare, as well as sporting goods, and materials for protecting food and beverages.
While many larger companies are still reluctant to rely on wireless networks to transmit important information in industrial settings, there is an increasing acceptance rate of the newer, more robust wireless options that are now available.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.