Chuck, I think the ShapeTape almost deserves its own story, although it's not really used in apps we cover. Those include motion-capture techniques for animated movies: I've seen two that use a similar (if not the same) technology, and both were considered ground-breaking. One is the animated film based on Beowulf with Angelina Jolie playing Grendel's mom, and the other was A Scanner Darkly, based on a Philip K. Dick novel.
Thanks, Bob. Glad you like my articles on robots. Some truly amazing things are being done in robotics. I think you're right: we may need Asimov's 3 laws sooner than we realize: I just submitted a story on a swimming robot. Of course, if you think the future is going to go more along the lines of the Terminator story-line, then it may be already too late, lol.
Truly amazing!I am also amazed at the speed in which the robotic system duplicates the movement of the shape tape and the degrees of freedom exhibited by the arm.If the robots get much more sophistificated we will have to make sure the designers employ Asimov's Three Laws of Robotics:
A robot may not injure a human being or, through inaction, allow a human being to come to harm.
A robot must obey the orders given to it by human beings, except where such orders would conflict with the First Law.
A robot must protect its own existence as long as such protection does not conflict with the First or Second Laws.
I suspect we have a long way to go but it seems to me the progressis consistent and steady.Great article Ann.
flared0ne, I did see the Leap announcement, but so far it's not a real product yet. If they can do what they say they want to do, it may leave Kinect technology in the dust. Also, as we stated in my article: ShapeTape was used only to test the A*Star system. It will not be required to use it: that's what Kinect is for.
Ann, I think this is a great achievement and revolutionary thought, where robots can be used in a very human friendly way. I think it may be able to detect the remote motions also, where we can use such technologies is disaster areas.
Nice to see gesture recognition is getting up to speed and developing some traction in public awareness. Given the several mentions of various Kinect sensor implementations, it seems fair to mention another "disruptively innovative" technology which handles all the tasks this article describes. Look for and check out the threads of commentary, info etc which were started when a company named Leap Motion made an announcement on May 21st.
Key elements of their announcement: an inexpensive sensor device which enables position-detection, motion-detection, and gesture recognition -- with a reproducible position-detection accuracy of 0.01mm (i.e., ten micrometers, one wavelength of long-wavelength-range IR), anywhere within a "recognition space" volume of eight cubic feet. And a movement detect-and-report latency below the threshold for human perception -- USB comm latency and your monitor's refresh rate are the bottlenecks there (I'm still hoping to hear a stat for maximum trackable position rate-of-change, re effective point-measurement-rate). And an API which uses perhaps 5% of the CPU time on a nothing-to-write-home-about generic PC. ...Hey, my jaw dropped too.
I am just one of many hopeful entries in their (still open) pool of developer applicants, with thousands scheduled to be selected to receive an SDK and a free Leap device in the next three months or so. Their obvious intention is to "crowd-source" a base of useable applications by the time the device is commercially available in the first part of 2013. Devices can be pre-ordered now, for the impatient.
Look for their website, their facebook page, their YouTube videos, and their forums. Because of patents pending, complete specs and technique info have not yet been released, but there has been some fairly credible guessing going on.
Important to note: The Leap technology will be making OUR reality "machine readable" -- If you can SEE something, you can use it as an input for consideration. No tape required. Anticipate interesting times.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Independent science safety company Underwriters Laboratories is providing new guidance for manufacturers about how to follow the latest IEC standards for implementing safety features in programmable logic controllers.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.