Great article, Jon – thanks so much for sharing on a sometimes overlooked but extremely important part of taking accurate measurements. Settling times should be taken into account and I think how that is best handled depends on the circuitry, what is being measured and what is being used to take the measurements. On test sets we would keep cables as short as possible and in the old days we would simple do that through software by trial and error to come up with a reliable software delay (scary I know!) However, with the systems we were working on we were mostly taking DC measurements that were extremely repeatable so it worked out okay. I really appreciate the variety of solutions you offered – with the complexity of today's designs they offer great solutions and makes me want to go experiment!
Thanks, Nancy. Often we overlook details that later cause problems. I know of several cases in which not accounting for settline time caused erroneous measurements. Thankfully the people involved discovered the problem.
I think that is where experience comes into play, Jon - and why it is so important for junior engineers to learn from senior engineers. I am forever grateful for the engineers that took the time to teach me real world things that you don't necessarily learn (or remember) from school - including settling times!
Yes, this subject becomes even more important when you are sampling from an analog multiplexer. Then the multiplexer output must settle before the sample is taken, which must also settle. :-)
Another similar important note is at the ADC reference. Like the input itself, some ADCs draw small surge currents from the reference, so a well thought out capacitance at the reference and a low impedance reference voltage source may reduce complications (and confusion) when figuring out settling time.
A middle school team from Rochester, Mich., has again nabbed the grand prize in the annual international Future City Competition, which drew students from 37 regions of the United States, as well as from England and China.
The word “smart” is becoming the dumbest word around. It has been applied to almost every device and system in our homes. In addition to smartphones and smart meters, we now hear about smart clothing and smart shoes, smart lights, smart homes, smart buildings, and every trendy city today has its smart city project. Just because it has a computer inside and is connected to the Web, does not mean it is smart.
Are you being paid enough? Do you want a better job? According to a recent survey Manpower released just before Engineers Week, employers and engineers don't see eye-to-eye about the state of US engineers' skills and experience.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.