This is really amazing.The capability of all "additative manufacturing" processes seems to expand exponentially ever month.To date, there seems to be in "operational mode" the following methods or rapid prototyping:
·(SLA) Stereolithography
·(SLS) Selective Laser Sintering
·(FDM) Fused Deposition Modeling
·(3DP) Three Dimensional Printing
·(Pjet) Poly-Jet
·Laminated Object Manufacturing
3D printing has risen ( I think ) to the forefront as the method most used by manufacturers.At any rate,it's fascinating to see uses other than manufacturing and medical and recreating history is a solid demonstration of what's possible with this technology.Well done Beth.
I think there has been a mistake here. It looked to me like that was the original bone being scanned, not the plastic copy. There were laser scanner lines in the picture. There would be no reason to scan the copy, unless they wanted to do a verification of accuracy.
Having said that, I have seen some very good copies. You could always tell that they were copies, but very good, none the less.
I know, isn't that bone amazing. The idea that 3D printers can be used to create really delicate and intricate works really showcases their potential. A high level of detail and precise levels of tolerance are critical if they are to gain widespread prominence in engineering applications beyond where they are today. Projects like these do a lot to show off their capabilities.
Intellectually, we all know the capabilities of 3D printing, but it's altogether different to see the actual results. The dinosaur bone is amazing in its intricacy. It looks like something that actually came from a paleontological dig. Seeing is believing.
I think the 3D printed reproductions are cool, but the 3D immersive experiences are really pushing the envelope in terms of recreating architecture and historical environments that couldn't otherwise be replicated with the same sense of realism. Just like advances in the technology have given birth to these historical 3D projects, the 3D projects will in turn spark innovation that will better position the technology to be applied to engineering applications we still haven't thought of.
I like the museum-quality art reproductions. I'm a fan of those, especially the stuff from classical Greece and ancient Europe. Lately, the majority of statues are made from "resin", which makes them seem like Barbie dolls. It would be great if this technology, plus higher-quality materials, could make some better-quality reproductions.
Beth, this is a good idea. One thing that you cannot get from a model or 3D display is the scale of things. Take, for example, the locomotive in the first slide. We have a railway museum here in Illinois. To stand next to, or go into, one of these locomotives is a real experience you cannot have in 3D. Of course, being able to see things like the pyramids in their original form is great. The virtual reality devices might be able to give a good feel for the scale of the structures. That will be interesting to watch.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
