John absolutely DOES give credit to MAKE in the video. Even identifying the issue number. The editors at DesignNews who did the write up on what the video was about are the ones who failed to give credit by simply stating "a magazine".
So in short, 15 year old John does it right. The professionals who's job it is to get these things right are the ones who screwed up.
Hi John, I'm curious why you didn't identify "a magazine" as Make, where Steve Hoefer's instructional article for the "indestructible LED torch" appeared. At Make, we give credit for things like this.
We remain admirers of Design News.
Very Cool project. I wish had your motivation and drive at fifteen. The internet would have been very helpful too. Recently I discovered an open source program called "Fritzing" where you can graphically assemble a breadboard version of your circuit. Then after some frustration create files to order a PCB or boards.
Jason I agree with your sentiment. Not every good idea comes from outside the box and sometimes it is wise to rely on experience. Not all experience results only in total nay saying. Sometimes it saves time. If John is not sure of the validity of the advice, then he should not abandon his plan, but if you are talking to an expert in a field and he can point to numerous failures of a particular method, why not utilize that information?
Thanks for you suggestion of more coils, alzie. I have just tested a new version with a TIP120 in place of the 2n3906's, and about 5 times more turns on the primary. I currently get about 0.02A at 10V out, which is more efficent than before, which was below 0.01A at 12-14V. Once I get a Jameco.com order, I'll try to match the reasonance of the coils for efficency.
Industrial trade shows, like Design News' upcoming Pacific Design & Manufacturing, deserve proper planning in order to truly get the most out of them as marketing tools. Here's how to plan effectively.
The series now can interface with a wider array of EtherNet/IP-compliant hardware across many industrial sectors, including factory automation systems, plastic injection molding apparatus, and materials-handling equipment.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.