HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/2  >  >>
Tim
User Rank
Platinum
Common Problem
Tim   6/29/2012 6:46:12 PM
NO RATINGS
On some of our machinery, exporting the process file from the machine to an SD card will automaticly safe the process file to an sfxxx file while on the machie process, the file has a part number and a descriptive note. You can only save one process on one card to avoid cross naming it when you transfer it to a PC.

Cadman-LT
User Rank
Platinum
Not their fault
Cadman-LT   6/20/2012 7:36:38 AM
NO RATINGS
All of the bad designs and lack of adequate thought put into a product. Well, bad designs are bad designs...still probably caused by people being asked to cut costs. I don't blame the engineers or the programmers. I know we always want the best. Problem is, the best isn't cheap enough. That's the problem. Money money money...no worries about it failing in a month. We saved a penny on every unit! Even though that penny would have made it last 5 years longer.

Cadman-LT
User Rank
Platinum
Re: "high end" recorder poorly manages file naming
Cadman-LT   6/20/2012 7:30:46 AM
NO RATINGS
That's the thing though. Why go so far as to make a "high quality" product and drop the ball on the software end. Just cause it looks cool and has lots of features...if the interface sucks and it doesn't function in a good way...you still failed.

Cadman-LT
User Rank
Platinum
Re: Digital recorder file naming
Cadman-LT   6/20/2012 7:25:56 AM
NO RATINGS
I disagree. I am schooling to be a programmer and I would never let that fly. That isn't the programmers fault...and if it is...they have the wrong programmers. Programmers..I tend to think....like to make cool stuff...usability is a main part of that. So to blame the programmers.....nah. it's saving money...just make it work...who cares about the end user anymore?!

Cadman-LT
User Rank
Platinum
Re: Filenames
Cadman-LT   6/20/2012 7:22:16 AM
NO RATINGS
That seems to be the norm anymore. Do as little as possible and let the end user figure it out. There used to be a day when people made a quality product and were proud to do it. Read some of the monkey stuff, people are fixing their own equipment because the company won't spend a few cents on a washer...just an example..what is a quality product anymore...high dollar? not always arg!

William K.
User Rank
Platinum
Digital recorder file naming
William K.   6/12/2012 11:00:54 PM
NO RATINGS
This is what happens when software is developed by programmers. That is probably the way that they organize their records at home, as well.One option might be to copy each file to a better name in another directory. Of course, that would take up lots of space, so an alternate mathod would be to save them by name on a backup disk.

tekochip
User Rank
Platinum
Re: "high end" recorder poorly manages file naming
tekochip   6/12/2012 11:01:21 AM
NO RATINGS
I've seen the same problem on a few of the recorders, including the Zoom.  It seems that you get plenty of features on the recorder, but the interface to the memory cards is a little primitive.  Of course, if they added file naming you need to be able to type in the name, edit the name, check for illegal file names, check for duplicates.  It would take a fair amount of code to add the feature.

Stanley2011
User Rank
Iron
Re: "high end" recorder poorly manages file naming
Stanley2011   6/11/2012 9:58:40 PM
NO RATINGS
Thanks for the comments - now I know why they do it as they do.

The "high-end" comment is definately subjective.  As an amateur with a hobby budget I found the Tacam has everthing I needed for under $1K.  I recorded a 20Hz to 20Kz sine thru a Zoom and the Tascam and found terrible distortion on playback from the Zoom, especially above 8KHz.

Once I've made my .wav files and transferred them to my PC, I use Wavepad by NCH Software for editing files - separating them into audio tracks, setting amplitude, Etc.  Wavepad is free and it looks similar to Audacity.  I used Audacity in the past but I thought I heard some type of distortion in the playback.  I switched to Wavepad and the sound seems clean to me.

Tom

 

Charles Murray
User Rank
Blogger
Re: Filenames
Charles Murray   6/11/2012 6:40:52 PM
NO RATINGS
I agree, Cadman-LT. Since one of the accepted uses of the device is moving songs to and from a PC, the manufacurer should have been more prepared. Unfortunately, it's all too easy to release a product and let the customer deal with the problem after it's purchased.  

Cadman-LT
User Rank
Platinum
Filenames
Cadman-LT   6/11/2012 4:46:54 PM
NO RATINGS
I agree with naperlou. They could have done a much better job, well they could have at least done something! It doesn't seem like they even gave it a thought. I would be like you and have expected at least something....something better than that. Just the simple correct dating of the song would be enough...how hard could that possibly be!?

Page 1/2  >  >>


Partner Zone
Latest Analysis
In this new Design News feature, "How it Works," we’re starting off by examining the inner workings of the electronic cigarette. While e-cigarettes seemed like a gimmick just two or three years ago, they’re catching fire -- so to speak. Sales topped $1 billion last year and are set to hit $10 billion by 2017. Cigarette companies are fighting back by buying up e-cigarette manufacturers.
Microchip recently released the 3D TouchPad, the first USB PC Peripheral device that couples 2D multi-touch input with 3D air gesture technology. The company seeks the help of developers to further enhance the capabilities of the technology.
Made by Monkeys highlights products that somehow slipped by the QC cops.
To give engineers a better idea of the range of resins and polymers available as alternatives to other materials, this Technology Roundup presents several articles on engineering plastics that can do the job.
Mac Cameron of Stratasys describes the company’s Connex3 technology, which allows users to 3D-print complex parts in one build with no assembly required.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service