<<  <  Page 4/4
Ann R. Thryft
User Rank
Re: Coin trap full = replace washer ?
Ann R. Thryft   6/7/2012 3:08:47 PM
Thanks, this story gave me a good laugh. Especially when the author decided to make an access hole with his saber saw. I agree with Glenn. And why the heck not? If my husband wants to cut an access hole in the washing machine so he can spend less time messing with it and more with me, I'd be a happy camper. Actually, I'm more likely to be the one that comes up with that idea, since stubborn machines and bad designs annoy me more.

Jon Titus
User Rank
Take photos as you go
Jon Titus   6/7/2012 12:57:58 PM
Use a phone camera of digital camera to take photos as you disassemble.  Then you have a record of what goes where.  I use my phone camera to make a visual shopping list before I go to Lowe's and Home Depot.

User Rank
Coin trap full = replace washer ?
GlennA   6/7/2012 10:23:13 AM
Well, maybe the coin trap was designed for ease of assembly, not for ease of servicing.  That reminds me of cars where the engine must be dropped to change a spark plug.  I like your decision to 'add' an access panel;  maybe you will have to service the coin trap again ?  Can you patent the modification and sell it to the manufacturer ?

User Rank
I like the solution, but......
tekochip   6/7/2012 9:28:15 AM
there's is no way my wife would let me cut a hole in her washing machine!  I've had the same problem with the coin catcher collecting guitar picks and coins.  Since the debris belongs to me, I have to open the machine and get the junk out. 
The negative reinforcement has worked in bringing the behavior to extinction. Dr. Skinner would be proud.

Beth Stackpole
User Rank
Re: Repairing and reassembling
Beth Stackpole   6/7/2012 9:01:32 AM
You would think they'd make a coin trap that was more accessible, somewhere where the non-fix-it could get access and empty it much like the lint trap. As the resident laundry person in my household, I can't tell you how many coins I collect (dollars too). My rule is the person doing the wash gets to keep the goods. I've found myself with a decent amount of play money over the years, which is why I don't whine too much about doing laundry!

User Rank
Repairing and reassembling
Mydesign   6/7/2012 7:46:28 AM
1 saves
Gardy nice experience and funny solution. Once I have a similar experience, while repairing a machine. I disassembled everything, rectified the problem and repaired. Still that time everything was under my control and done well. When I started reassembling, the confusion starts. Finally I found that some parts are screws are left over and I don't know where to be placed. Without that I switched on the machine and it works fine for some time.  But later on found that some extra wear & tear, additional noises etc while operating the machine.

<<  <  Page 4/4

Partner Zone
Latest Analysis
A database containing information on over 16,000 tests done on 500 composites and other materials for wind turbine blades is now available free from Sandia National Laboratories.
Imagine being able to illegally download a physical product the same way you can with music and videos. That’s basically what’s happening with 3D printing and digital manufacturing, with huge repercussions in the intellectual property domain.
Our latest Design News Quick Poll reveals that readers are facing serious cyber security challenges.
Ford will be the first automaker to commercially use Alcoa's tough & fast Micromill aluminum alloy process and materials, debuting on several 2016 F-150 truck components. Alcoa will also license its Micromill process and materials technology to Danieli Group.
Even as an increasing number of instrument manufacturers migrate toward modern touch screens, many engineers say they still prefer the tactile feel of knobs and buttons, a new survey says.
Design News Webinar Series
10/1/2015 11:00 a.m. California / 2:00 p.m. New York
9/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 19 - 23, Embedded System Design Techniques™ - Driver Design Patterns and the Internet
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service