As a racing enthusiast, the state of Indycar racing saddens me greatly. The Indianapolis 500 began as a race that encouraged innovation with a minmal set of rules [like a max engine size of 600 CID] and has evolved in the opposite direction. Many of the rule changes are for safety - like smaller engines. The most disappointing thing today is that as the rules continue to narrow, they support the status quo with whatever teams can squeeze out of it. The most blatant reaction was in 1967 when Parnelli Jones looked like he was going to win with 10 miles left and then had a bearing failure [oops - reliability problem]. Jones had qualified his turbine powered car in the top 10 and had shown that he could run ahead of everyone - the reaction of the rules committe could have been to 'tweak the rules' to equalize the turbine, but their reaction was to reduce the turbine intake area by 33% - effectively saying 'we do not want them turbines running here!'. They have been gradually moving to an "everyone races the same car" model ever since. They even want to restrict firmware updates.
OK, got that off of my chest.
With all of the restrictions, teams still have to tune the overall system. Although the cars 'all look alike' just like a casual observer might comment about the compact cars on a rental lot, there is more than one distinct body shape in the Indy photos [at least for this year]. Outside of the aero and mechanical reliability, it looks like evrything else is electronic - lots of opportunity for a tiny edge on the competition.
One thing that I envy about the guys that support these cars - REQUIREMENTS - the marketeers and chrome hangers aren't coming in every week asking for a new feature!!
After reiability, which relates to "If you can't finish the race you can't win the race", handling is vitally important. And keeping the tires on the pavement is an important part of handling, a MOST important part. So now areodynamics is one very good way to hold the car to the road, even moreso since the rules don't allow the cars to carry gravity intensifiers or inertia absorbing systems. Presently the cars are l9imited to holding onto the track by means of down force, which is provided by aerodynamics.
The result is that with the limitations on horsepower, which is limited by engine rules, all of the cars are underpowered, at least by the explanation that I got from one driver years ago, " If you can make it all the way around the track without having to back off, you don't have enough power". I have observed that to be totally correct, and I have used that relationship to win some races. But my point is that with all of the cars being a bit underpowered, the only areas left are handling and reliability. And reliability is not exciting to watch.
bob from maine...nice post! You did a good job of summarizing many of the basics about racing seemingly identical cars. Yes, race conditions constantly change, and each car has a different driver...adjustments are needed that most casual race fans are not aware.
At Detroit's Belle Isle Gran Prix last weekend, Dario Franchitti improved from a 15th start to 2nd place finish. ...that's good racing by Dario and team!
There are an incredible number of variables that need attention when setting up a race car. Engines are not the same, close maybe but not identical. When maximum torque occurs and how fast it climbs, greatly affect handling, same with horsepower. Two 750 HP engines with the same displacement may have entirely different performance maps depending on the driver and track. Front/rear down-force, tire pressure and pressure build rate are significant. Not every driver is comfortable at driving ten tenths for 100 laps, let alone 500 miles. A driver who can drive 20 laps within 1/10th of a second difference per lap while adjusting for wind, temperature, tire pressure, engine variables is a far better calculating machine than the finest computer ever made. The difference between "push hard" and "not so hard" may end up only changing the lap time by 2 or 3 tenths of a second but may extend the life of a component by a hundred miles. The rules package has made Indy racing somewhat less fun for the casual race fan who sees a 500 mile parade of identical looking cars interrupted by occasional crashes. It in no way diminishes the remarkable success achieved by the winning team.
Architect is right about the IndyCar race this past weekend. Because all the cars need to be "spec" machines, they all look alike except for the paint. Now I believe next year other manufacturers can offer "aero kits" which supposedly will make the cars a little different but how much is anyone's guess.
Roger Penske himself said the cars are essentially giant vacuum cleaners and literally sucked up the temporary asphalt. One could argue that using asphalt to patch a concrete surface was just asking for it, but I will focus instead on the huge amount of downforce these cars create.
The reason why the teams spend so much time on shock absorbers, suspension tuning, and CFD is to make sure the car stays firmly planted to road surface so the aerodynamics can work. There is way too much attention being given to making sure the attitude angle and ride height don't vary much. Springs are incredibly stiff. Shocks are close to be overdamped. All in the name of aero.
While certainly some downforce is necessary to keep the cars from flying off the road, the huge amount now generated is clearly excessive. It is said that the current IndyCars generate 2 - 4 times the car weight in downforce. That seems absurdly high. It makes marginal drivers the equal of really good ones. To me, racing is about car control, not having the guts (or stupidity) to plant your right foot firmly to the floor and hang on.
I fully agree with the reliability and handling of racecars. What good is a racecar if it breaks (fails) before the end of the race? I've seen many interviews from top competitive drivers sorely disappointed in their provided equipment that broke just before the race ended. Racecars that can't handle well look slow on the race tracks compared to the better handling cars, and that very much includes NASCAR. Tires and suspension adjustments are critical to success (tires can be adjusted by air pressure).
Wal-Mart will hold its second Made in the USA Open Call July 7-8, at its headquarters in Bentonville, Ark. The event will be a repeat effort by the world’s biggest seller of consumer goods to increase the amount of US-made products it sells in Wal-Mart stores, in Sam’s Club members-only wholesale outlets, and on walmart.com.
From design feasibility, to development, to production, having the right information to make good decisions can ultimately keep a product from failing validation. The key is highly focused information that doesn’t come from conventional, statistics-based tests but from accelerated stress testing.
There’s a good chance that a few of the things mentioned here won't fully come to fruition in 2015 but rather much later down the line. However, as Malcolm X once said, "The future belongs to those who prepare for it today."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.