As for covering fire I like 10weapons firing far more bullets than 1 squad weapon.
Since my example's ammo weighs 30% of a M-16 round each soldier has 50% of a SAW . And 10 barrels will put out more rounds before overheating. I was thinking about using gas pressure to power an air cooling system to increase firing time. I guess that would make it a full MG.
Yes Hybrid is about what I'm talking about. And it's not just about saving ammo. Hitting your target makes that target no longer a problem thus don't need more firepower and go to the next threat.
Future wars is going to be special Ops mostly and the poor soldier expend so much energy carrying so much weight it can't help effect their eff.
Yes kind of bullpup but no ejection as no casing. Since no ejection the breach can be simplified, just stuffing on after the other. Because most of it is so light some the weight can be used in the barrel making it last longer, fire more rounds before overheating.
One test not described, that needs to be passed every time, is to dunk the weapon in mud and then have it still function without jamming. Then drop it in swamp muck and do the same thing aagain. Not jamming after you drop down during being ambushed is important, by the way.
Huge busrsts are not used frequently because ammo is seldom in infinite supply. But a few quick rounds aimed at a sniper, or a longer burst at a running attacking group must be available when needed.
A lighter gun sounds good, more room to make it more reliable.
The M249 is a squad automatic weapon. Its intended for covering and suppressive fire as well as putting up a wall of lead in those circumstances where nothing else will do. In reality only in the Hollywood movies do you blindly fire on full-auto with the hopes of finding that one in a thousand shot. The SAW supports a large group of soldiers, not the just an individual.
As our troops can attest from experiences in Iraq and Afghanastan, ammo cannot always be counted on to be in a endless supply.
I do quesiton the validity of the design if the 12% descrease in ammunition is part of the weight savings. Sure the weapon system in your hands might weigh less, but the solder will still want to carry as much ammuntion on their person, making the net weight savings zero for that portion of the "design". 15 out of 19 might like the lighter weight on a firing range, but when their down in the dirt, they want reliable systems. It smacks of a certain amount of marketing hype. Sorry, but it does.
The AK-47 is still the most widely used and abused personal automatic weapon in the world. It is hardly high tech or having any modern design elements, but it is as reliable as they come with plenty of stopping power.
If anything, I've heard that many of the weapons used by the US military simply lack the stopping power to bring down the bad guys. It doesn't matter how many rounds you put up if the enemy keeps coming.
It says "12 percent reduction in ammunition volume".
Does that mean 12% less ammo?
I can see the guy/gal? in the field when he/she? uses the LAST round thinking: At least I can run away faster with this lighter gun.
About 10 years ago I was working at a company that uses M16's for a mil. application. We took a few out one day (brand new out of the box) and 3 of 5 of them jammed . Thank God we weren't up to our necks in a rice paddy.
Apparently the mfr. STILL haden't fixed the jamming problem from the late 60's.
May be the DOD will test the thing in this article more thoroughly.
I agree Zippy. Jerry seems to want a hybrid of the front line soldier and the sniper. For what we know about effectiveness, it seems like having both is better.
Jerry, there is a machine gun design out there like what you describe, generically called a 'bullpup', and initially made famous by Steyr arms. It basically moves the handles and trigger group forward on the weapon, and has the magazine in the rear stock. It and it's various makers versions are standard issue in many european armies.
MSC and Nastran are still holding strong. You're right about it being big in military and aerospace applications, but they seem to have gained a footing in other sectors as well, including industrial equipment and even motor sports racing.
What they need is better wetware. They need to rethink the whole weapon system. I mean they fire thousands of bullets to hit once on average!!
Rather than machine guns train the soldiers to hit what they are shooting at and give them weapons that can do it in a couple shots.
Going to a caseless round in the 30cal range with a longish barrel for accurarcy, stability, the handgrip almost to the end of the barrel with trigger. Then in the rear have the ammo feed, firing pin strapped to the soldiers forarm close to the elbow.
This cuts weight of both the weapon and ammo by 50% and far faster to bring to target naturally just like part of one's arm, always ready without the neck strap or having to hold it. With a barrel just a little longer than their hand for close quarters work.
Have you seen what they make these soldiers wear? 100+ lb packs in some cases.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
