HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 4/5  >  >>
Rob Spiegel
User Rank
Blogger
Re: Battery charging.
Rob Spiegel   5/25/2012 10:30:48 AM
NO RATINGS
It sounds like staff training was the only reasonable solution, Ken. Why is this situation unique? Apparently this was not a problem in the older building.

EEMEDIC
User Rank
Silver
Lose Plugs...
EEMEDIC   5/25/2012 9:33:28 AM
NO RATINGS
We have similar problems with loose charging plugs of battery operated equipment on ambulances...and of course the battery is always dead when you need it most. Maybe its time we created a new "standard" outlet for medical equipment....something easy to use but with better retention...and then create a simple adapter that allows the device to be used in a standard outlet, of course the adapter needs to be somehow mounted to the plug so its never lost...medical equipment typically doesn't have the same price pressures as consumer electronics...when you buy a $30,000 EKG monitor, you don't mind paying a few extra $ for a plug that works!  One simple solution that we have tried that seems to work is switching to plugs with small LED power indicators in them, with a quick look you can tell if there is power being supplied to the power cord.

KMoffett
User Rank
Iron
Re: No solution for this one.
KMoffett   5/25/2012 8:09:51 AM
NO RATINGS
TJ,

Twist-loc connectors might solve that particular problem, but would cause greater ones.

First, 120VAC medical equipment with attached cord sets (in the US) come with "standard" hospital-grade 3-prong plugs. And, all standard outlets accommodate these. The cost of switching all outlets where a device might be used and all device plugs to compensate for this one problem would be prohibitive.

Second, medical devices running in battery-mode frequently accompany transported patients.  That would mean that any area or vehicle where the patient might be held for any significant length of time would also have to accomodate these plugs for recharging to maintain operation. That would include ambulances, clinics, waiting rooms, hallways....even homes.

That problem, in that hospital was resolved economically through staff awareness.

As an aside, a large percentage of medical devices are now using wall-plug power supplies...for two reasons. The medical devices could be made smaller. And, maybe more practically, the UL approval is now entirely on the power supply manufacturer, not on the medical devise manufacturer. The "wall-warts" compounded our outlet problem. I'm sure you've experienced the situation of a wall-plug supply, plugged into one outlet of a duplex, blocking the second outlet. Each such device occupies two outlets.

Ken

warren@fourward.com
User Rank
Platinum
Re: No solution for this one.
warren@fourward.com   5/25/2012 6:42:10 AM
NO RATINGS
I like the twist lock suggestion.  Nice trick, Mr. Hat.

This may not be the only application where a critical circuit could come unplugged.  The twist-lock would solve those problems, as well.  And think of the electricians that could be put to work!

 

TJ McDermott
User Rank
Blogger
Re: No solution for this one.
TJ McDermott   5/25/2012 1:18:54 AM
NO RATINGS
Warren, a twist-lock plug and receptacle would fix this problem.  The important outlets in a hospital SHOULD be different from a conventional outlet, so mundane things like a fan or radio cannot be plugged into them.

Twist-locks would keep the receptacles dedicated to hospital equipment, be easy to use, prevent accidental unplugging.

It's a Hat-trick solution.

warren@fourward.com
User Rank
Platinum
Re: Alarming alarms
warren@fourward.com   5/24/2012 8:28:55 PM
NO RATINGS
With 50 alarms going off at the same time, and the heart attacks created, it would be good for business. 

warren@fourward.com
User Rank
Platinum
Re: Alarming alarms
warren@fourward.com   5/24/2012 8:28:54 PM
NO RATINGS
With 50 alarms going off at the same time, and the heart attacks created, it would be good for business. 

warren@fourward.com
User Rank
Platinum
Re: No solution for this one.
warren@fourward.com   5/24/2012 8:27:35 PM
NO RATINGS
We were talking hospital plugs, weren't we?  I think you reverted to the lawn mower question.

 

Charles Murray
User Rank
Blogger
Re: No solution for this one.
Charles Murray   5/24/2012 7:48:07 PM
NO RATINGS
I agree, Warren. It's tough to train people who don't apply a little muscle to suddenly start doing it.

KMoffett
User Rank
Iron
Alarming alarms
KMoffett   5/24/2012 4:18:53 PM
NO RATINGS
"Maybe the alarm on the devices used should sound until the power is secured.  And loud!"

Warren, can you imagine a power failure, and having a hundred-plus devices going into battery-mode and continuously, loudly alarming. The manufacturers make choices based on real world user input...hopefully.

 

Ken


<<  <  Page 4/5  >  >>


Partner Zone
Latest Analysis
Samsung's Galaxy line of smartphones used to fare quite well in the repairability department, but last year's flagship S5 model took a tumble, scoring a meh-inducing 5/10. Will the newly redesigned S6 lead us back into star-studded territory, or will we sink further into the depths of a repairability black hole?
Fifteen European research centers have launched EuroCPS to help European companies develop innovative products for the Internet of Things.
Get your Allman Brothers albums ready. The iconic Volkswagen Microbus may be poised for a comeback, and this time it could be electric.
In 2003, the world contained just over 500 million Internet-connected devices. By 2010, this figure had risen to 12.5 billion connected objects, almost six devices per individual with access to the Internet. Now, as we move into 2015, the number of connected 'things' is expected to reach 25 billion, ultimately edging toward 50 billion by the end of the decade.
NASA engineer Brian Trease studied abroad in Japan as a high school student and used to fold fast-food wrappers into cranes using origami techniques he learned in library books. Inspired by this, he began to imagine that origami could be applied to building spacecraft components, particularly solar panels that could one day send solar power from space to be used on earth.
More:Blogs|News
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 20 - 24, Taking the Internet of Things to the Cloud
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service