Now the next thing that it needs is a way to announce the control function before the control is activated. That would be useful in that it would be able to avoid pushing the wrong button, not just telling someone what they did. Not needed so much on a phone, but certainly valuable on a crane, or driving a car, both places where a wrong command can be very inconvenient. Of course, most cranes don't use touch controls simply because they are both non-determinant and too subject to erronious actuation. In addition, a crane operator does have the time to make sure they have the correct control in hand.
In that case MattO, it could be standard issue on cell phones too. Since people refuse to stop using them when they are driving - they could keep their eyes on the road when dialing.
Another application I considered was on the controls of e.g. a crane, so that the operator did not have to take his eyes off the load while finding which button or lever he needed. This would be more useful in training, as an experienced operator probably wouldn't need the voice prompt anymore.
I found in testing that once folk learned the layout of a new device using the audio tags, the voice then became annoying. So you need an 'off' switch!
Thanks for your interest in the device. The electronics is so cheap to implement that I hope that manufacturers will implement it in their products as a routine, to help folk who can't see the controls easily.
What a cool and beneficial device to aid the blind in using Consumer Electronic products. The Arduino is a great electronics hardware platform to use in developing all types of innovative consumer and industrial products. In terms of Smartphone applications, I'm developing a robot controller device using a Motorola DroidX smartphone, a LEGO NXT, and an Arduino. By touching the DroidX screen, I can control motors, LEDs, or high current devices with an Arduino being the primary control driver using Bluetooth tech. This controls application project is being develop for an Arduino book I'm currently writing for Apress books.
Great to see that the Blind are now able to use Android too. Here at Industries for the Blind, all our people use iPhones because iOS has always had this capability built into the system. Our blind workers are able to navigate their iPhones faster than I can. They just go into Settings > General > Accessibility > and turn 'Voice Over' ON.
That's funny NadineJ. I was out there trying not to look at the sun yesterday. It was hard to resist. I couldn't see much. I tried the hole in the paper, but that wasn't very exciting. Finally I went to the CNN site to get a good view.
This is really cool. As a large part of the population (Boomers) continues to age, it will be needed.
Considering how many people I saw staring at the solar eclipse yesterday without proper eyewear, it may be needed by younger generations sooner than later!
Now that is a great idea. I can see this type of application having other uses as well. For those who are not technologically savvy, this would help them too. It could also be used for product demos.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
PTC will offer a virtual desktop environment for its Creo product design applications, potentially freeing engineers to run them from remote desktops on a variety of operating systems and mobile devices.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
Now that solar and wind harvesting technologies are a thriving market, researchers are seeking other environmentally related energy sources for which they can create harvesting devices.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
