<<  <  Page 2/2
Rob Spiegel
User Rank
Re: There should be a wearable angle to renewal energy source
Rob Spiegel   5/17/2012 3:56:30 PM
How ironic it would be if major breakthroughs in renewal energy came from the military. That very well may happen. For decades, the military was the antithesis of clean energy, at least in perception.

Ann R. Thryft
User Rank
Re: There should be a wearable angle to renewal energy source
Ann R. Thryft   5/17/2012 1:29:02 PM
It's good to know the military is investigating portable renewable energy sources. This may help speed development of same in the commercial sector. Regarding energy harvesting materials, like clothing, several fabrics are in R&D, such as PowerFelt
but they don't yet produce enough for portable electronic systems such as those soldiers use. These systems Elizabeth's article describes look to be a big improvement.

Beth Stackpole
User Rank
There should be a wearable angle to renewal energy source
Beth Stackpole   5/17/2012 10:29:00 AM
Given its relatively heavy weight, I'm assuming this design isn't meant to be carried around by soldiers in the field, but rather, to man some remote field station. Looking at the pic, (which is hard to interpret BTW), got me thinking that this looks a lot like fabric, maybe not for uniforms, but for a tent or some other mobile structure. That got me thinking why couldn't clothing or canvas be the so-called "canvas" for a renewable energy source???

<<  <  Page 2/2

Partner Zone
Latest Analysis
Remote monitoring now looks beyond the individual motor or conveyor and instead views the process from end to end.
BASF is partnering with Hyundai on a high-performance concept car that showcases both eco-friendly, sustainable materials and materials to enable lighter weight cars.
In an move to ease the use of multiple product design tools, PLM provider Aras and EDM company Zuken have integrated their products.
General Motors is putting an off-road twist on hydrogen fuel cell technology with an imposing new pickup demonstrator called the Chevrolet Colorado ZH2.
Fine powder printing of industry-standard metal and ceramic powders with a grain size of less than 10 microns is now available from industrial 3D printer maker ExOne for its Innovent printer.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service