Energy storage is just basic physics. If we can find just the right material and process, it will be like a magical genie that's released to serve our bidding. Which is why there is an almost religeous component to the desire to have an electric car (with the necessary energy storage). Reality is less rosey: eventually it might happen (if someone makes the right discovery), or maybe not.
Last week I just pulled an old model train power supply from the attic and discovered that the diode used to rectify the AC to DC was not silicon but the old selenium type. Seems unrelated, except that this reminds me of the history of semiconductor development which seems apropos.
Back in the day, electronics were all based on vacuum tubes. These were hot, large, didn't scale smaller well, and wasted lots of power. At least they were better than the mechanical devices used before tubes. Everybody searched high and low for a better device for decades (sound familiar?). The only available solid state devices in wide use were whisker diodes (handmade, they were not very good signal diodes and certainly couldn't be used for power) and selenium diodes (better for power, but they were very leaky and not as good as vaccuum tubes).
It took the discovery of that magical combination of silicon doped with impurities that can be, for all intents and purposes, printed to create a REAL alternative to tubes. It would seem battery development is going down EXACTLY the same path as semiconductors. Moore's law won't apply until that magical discovery is made.
I don't think that we necessarily need a breakthrough in new materials for a better battery. I think what the EV industry really needs is a battery manufacturing breakthrough to make current battery technology cheaper. If we could just make our current Lithium Ion technolgy 50% cheaper that would go a long way in lowering the price of electric vehicles. While electric cars would of course benefit from smaller and lighter batteries with higher energy density, what we have today is good enough if it could be manufactured more affordably.
Yes, the softening of the EV market isn't helping, Rob. Recently, car reviewers have seemed shocked when they've looked at the prices of the most recent EVs. Toyota's RAV4 EV came in at $50,000; Ford's Focus came in just under $40,000 and the tiny Mitsubishi i-MiEV clocked in at $31,125, base price. A Wall Street Journal reviewer who admits he's wanted an electric car for a decade seemed dumbfounded by the price of the RAV4 EV, writing, "I can't imagine more than a handful of people willing to spend twice the cost of a gasoline-powered RAV4 to have an electric version." The problem is, everyone's waiting for EVs to follow the path of PC technology, and it isn't happening.
I agree, Ann. The investment focus should be on applied research and even basic research, rather than on car companies that are making incremental improvements. Incremental improvements might help with plug-in hybrids, but they will limit the acceptance of pure electric cars to early adopters.
The softening of the EV market can't be helping in the support of battery development. The recall has got to hurt. And Ann is right. The venture capital world is accustomed to Moore's Law.
It sounds like the venture capital industry needs educating on how different the development of some technologies--like batteries--are from the typical curves for semiconductors. Or maybe the funding sources just need to be constructed in a different way for funding such slower, longer-cycle technology development. The semiconductor R&D model, and for that matter, its manufacturing model, are not always transferrable to other tech sectors, such as batteries or vision and optics.
A great, reminder, Chuck, that great innovation requires patience and long, laborious work. In our fast-moving, immediate gratification society, we tend to forget that. We look at how fast technologies have come on board (cell phones, smart phones, the Internet) and expect that everything follows the same rapid-fire trajectory. Some things, as you well said, can't be rushed.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
