The problem with rebranding chinese product under older, known brand names is that you don't know what you are getting. You may get what you pay for, or you may get a piece of garbage for full price. The effect is to dilute the power of brand names as a badge of quality. The end result for the consumer is that the smart bet to make (when they gamble buying a new product) is to put less money up front (i.e. buy cheap and pray).
Looking for the "Made in USA" branding along with the brand name is the only method left (even that is iffy, since there has certainly been some garbage made here in the USA as well, but at least the money I pay for that garbage stays here).
Regarding the assertion that I want the latest and greatest technology, the truth is NO WAY do I want any of the bug-filled, current fad gimmicks that seem to abound. Almost universally the products di deliver superior performance for a few hours, at which time they wear enough that they only deliver marginaly acceptable performance.
My choice is a product that has been on the market long enough so that I can see if they live well past the warranty period. Of course many of them are obsolete before the short warranty runs out, which is the stated goal of many manufacturers.
When the author sent in this Made by Monkeys posting, he did not capitalize "shop vac," and that's how it ran. I assumed (maybe wrongly) that he was using a generic term and not singling out Shop Vac vacuums.
Ummm, I believe you are misinterpreting the article. The author (or Rob) stated "I was given a more modern shop vac as a gift."
Could be ..... I read through the posts rather quickly, and may have done just that. -----------------------------------------------------------------------
The keyword here is "selling." They may well have been selling some re-logoed Chinese brand that they didn't specify, design, or manufacture because they had marketing channels into Lowe's and Home Depot, and the Chinese manufacturer didn't. All the big manufacturers do this. Dodge Sprinter, Mercedes Sprinter, Fruehauf Sprinter--it's the same truck regardless.
The story that I related occurred some 15 years ago, BEFORE China became the dominant manufacturing force for everything from Q-Tips to rocket shps! And, according to sources at the time, the GENIE brand vacuums were manufactured by a division of the GENIE Garage Door Operator Co. someplace in the U.S.A. I want to say either OH or MI, but don't recall exactly now. I do recall that we made several telephone calls in an attempt to secure more replacement bags, but found only an independent manufacturer who claimed to have equivalent replacement bags. From what we later learned, GENIE completely abandoned that product line. Maybe someone has more additional accurate info, but is it really worth discussing?
There is quality equipment of all types if one looks for it and is willing to pay the price. So often people buy hobby shop duty equipment and expect it to perform commercial duty.
Old Curmudgeon writes "I believe the two manufacturers were mentioned in the original post, GENIE & SHOP*VAC."
Ummm, I believe you are misinterpreting the article. The author (or Rob) stated "I was given a more modern shop vac as a gift."
That is clearly a generic use of the term. We all refer to our workshop vacuum cleaners which do not pull the detritus through the motor as "shop vacs" regardless of the manufacturer. I still use a Montgomery Ward unit I bought on sale in 1971. It's often attached to my table saw to catch the dust.
Old Curmudgeon also writes " My question had been, WHY was a garage door operator company selling vacuum cleaners?"
The keyword here is "selling." They may well have been selling some re-logoed Chinese brand that they didn't specify, design, or manufacture because they had marketing channels into Lowe's and Home Depot, and the Chinese manufacturer didn't. All the big manufacturers do this. Dodge Sprinter, Mercedes Sprinter, Fruehauf Sprinter--it's the same truck regardless.
That's good, Rod. For a lot of the new appliances that break down, the problems seem to be in the added electronics that didn't exist 20 or 30 years ago. Apparently, there are more things that can go wrong with the new appliances.
Even though it was only recently dumped, I cannot with 100% certainty remember who the manufacturer was. I even spent some time looking through the usual stores to see if I could find it before I posted the story.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
