HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/4  >  >>
Rob Spiegel
User Rank
Blogger
Re: Any possibility of commercial applicability?
Rob Spiegel   5/23/2012 2:32:33 PM
NO RATINGS
Yes, I remember the difficulties with component tracking and part numbers. For some reason REACH didn't see to cause the same consternation. At least not that I noticed. I guess it's becasue REACH was more of a reporting function.

Ann R. Thryft
User Rank
Blogger
Re: Any possibility of commercial applicability?
Ann R. Thryft   5/23/2012 12:47:53 PM
NO RATINGS
Actually, among the high-end embedded board-level products we covered, RoHS seemed to affect most the manufacturers that served both mil and commercial customers, since they often ended up running two separate lines for two different versions of the "same" product. Mil-only board manufacturers were  not affected much until later. One thing that did affect them both was the nightmare of components tracking and part numbers changing.

Rob Spiegel
User Rank
Blogger
Re: Any possibility of commercial applicability?
Rob Spiegel   5/22/2012 3:00:19 PM
NO RATINGS
Cool subject for a magazine. Yes, I can imagine you covered RoHS quite a bit, since it had a major impact on the COTS market.

Ann R. Thryft
User Rank
Blogger
Re: Any possibility of commercial applicability?
Ann R. Thryft   5/22/2012 2:38:13 PM
NO RATINGS
Since there were only two of us, myself and the editor-in-chief, I did a little of everything. Mostly we did not address distribution, but design and development technologies for HW and SW, comms, and a lot of board-level products and technologies. I wrote several features on RoHS, too.

Rob Spiegel
User Rank
Blogger
Re: Any possibility of commercial applicability?
Rob Spiegel   5/22/2012 1:58:17 PM
NO RATINGS
You worked for COTS Journal. Wow. What did you cover? The components market? Distribution?

Ann R. Thryft
User Rank
Blogger
Re: Any possibility of commercial applicability?
Ann R. Thryft   5/22/2012 1:24:43 PM
NO RATINGS
As I learned working for COTS Journal, COTS doesn't just mean actual end-system computers and apps software. It can also refer more broadly to both software and hardware design and development platforms, specifically for creating end-system hardware and software used in the field. Ruggedization is taken for granted for military field use; that feature doesn't determine whether a machine is COTS. A COTS-based machine may also be further tweaked--and usually is--for specific apps. The big difference is that the military is no longer spending zillions of dollars on proprietary, entirely customized systems.

Rob Spiegel
User Rank
Blogger
Re: Any possibility of commercial applicability?
Rob Spiegel   5/22/2012 1:16:09 PM
NO RATINGS
What I've heard is that the COTS stuff is used for office and support functions. When it comes to electronics out in the field, the electronics are ruggedized (and leaded) so they can withstand a difficult environment over many years.

Ann R. Thryft
User Rank
Blogger
Re: Any possibility of commercial applicability?
Ann R. Thryft   5/22/2012 11:59:30 AM
NO RATINGS
EV Race Car

The COTS systems, platforms, networking technologies, and software are, as the term says, commercial off-the-shelf hardware and software, meaning stuff that's originally designed and built for the rest of us. Basically, that means the military is using Windows-based laptops and other standard commercial hardware and software, as well as standard networking protocols, which is actually kind of scary. This is instead of spending zillions of dollars on designing their own stuff, like in the "good old days." Even the NSA buys a lot of standard signal-processing equipment.

Rob Spiegel
User Rank
Blogger
Re: Any possibility of commercial applicability?
Rob Spiegel   5/21/2012 2:27:19 PM
NO RATINGS
I wasn't aware of that, Ann. I thought they were just cheap commodity parts. But it makes sense that systems and platforms could become commodity items that could be used in a variety of products.

Ann R. Thryft
User Rank
Blogger
Re: Let's say
Ann R. Thryft   5/21/2012 2:14:31 PM
NO RATINGS
Interestingly, many of the older "antiques"--more like family heirlooms--in my house are made of bio-based materials, such as wood and paper (which also used to be considered sustainable materials until we nearly used them up), or ceramics and brick, which are sustainable. Even metals were sustainable, and still are. Most of these materials are commonly found in the rubbish heaps of our ancestors, and give archaeologists a lot to study. Much of the problem with materials becoming non-sustainable has occurred in more recent times because of overuse (due in part to enormous population growth), as well as because of newer materials with complex processes and polluting wastes.

Page 1/4  >  >>


Partner Zone
Latest Analysis
Conventional wisdom holds that MIT, Cal Tech, and Stanford are three of the country’s best undergraduate engineering schools. Unfortunately, when conventional wisdom visits the topic of best engineering schools, it too often leaves out some of the most distinguished programs that don’t happen to offer PhD-level degrees.
Sherlock Ohms highlights stories told by engineers who have used their deductive reasoning and technical prowess to troubleshoot and solve the most perplexing engineering mysteries.
Airbus Defence and Space has 3D printed titanium brackets for communications satellites. The redesigned, one-piece 3D-printed brackets have better thermal resistance than conventionally manufactured parts, can be produced faster, cost 20% less, and save about 1 kg of weight per satellite.
A group of researchers at the Seoul National University have discovered a way to take material from cigarette butts and turn it into a carbon-based material that’s ideal for storing energy and creating a powerful supercapacitor.
Hacking has a long history in the movies, beginning with Tron and War Games and continuing through The Girl with the Dragon Tattoo.
More:Blogs|News
Design News Webinar Series
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 22 - 26, MCU Software Development – A Step-by-Step Guide (Using a Real Eval Board)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service