@Ann: Thanks for this informative article on a timely topic. I had heard that Evonik provided feedstock for as much as 80% of the nylon-12 supply, not 40%, as the article states. Of course, even 40% represents many tens of thousands of tons. It's no exaggeration to say that everyone is scrambling for an alternative.
I'm a little surprised you didn't mention Arkema's Rilsan nylon-11, which is based on castor oil and which you covered in an article a couple of months ago. According to that article, it is already being used in fuel line applications.
Schulman's Schulamid nylon-6,12 is another product worth mentioning. It's not renewably sourced, but could potentially be a drop-in replacement for nylon-12 in extruded hoses.
The fact that the industry was able to pull together through AIAG and come up with a common test strategy was a major accomplishment.
It will be interesting to see if any of the substitute materials catch on in the long run, or if everyone will go back to nylon-12 as soon as it becomes available again. There is certainly a potential for long-term use of renewably sourced plastics to increase as a result of this situtation. It all depends on how well they perform and how much they cost.
naperlou, I was surprised to discover that the industry could go through such a shakeup when only one supplier went offline. Apparently, DuPont and others have already been working on replacements for awhile, as the supply has been tightening due to increased demand from other industries: solar and oil/gas.
This situation shows that there are real risks in the global supply chain. While this global supply may be effecient due to scale, there are many possibilities for disruption. I would have throght that the consumers of these materials would have plans in place before something like this happens.
Festo's BionicKangaroo combines pneumatic and electrical drive technology, plus very precise controls and condition monitoring. Like a real kangaroo, the BionicKangaroo robot harvests the kinetic energy of each takeoff and immediately uses it to power the next jump.
Design News and Digi-Key presents: Creating & Testing Your First RTOS Application Using MQX, a crash course that will look at defining a project, selecting a target processor, blocking code, defining tasks, completing code, and debugging.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.