The other problem is maintenance. The government funded windmills are largely laying fallow as the grants covered the windmill but not the maintenance. The power generated must not be of much value. Will this happen to these, too?
Can we assume that statement is twice the power of an equally sized turbine?
The GE 1.5MW turbine has a nacelle / blade assembly weight of 92 tons. Let's say the weight can be cut in half because the power is double at altitude. Call it a nice round 40 tons for discussion sake.
The Air Force has an aerostat based radar system. The aerostat is 186 feet long, 62 feet diameter, and lifts 2200 pounds.
Mr. Glass stated the system would be good for remote sites, and that makes a good deal of sense. Places that need a reasonably portable power source will probably not need a megawatt of power.
But he also implied this system could replace conventional tower turbines. I don't see that; something with the lift capacity of 40 aerostats would be necessary.
Helium is also a non-renewable resource; its price has steadily climbed.
Good questions, Rob. It's described as fully automated and for remote locations. That sounds like it doesn't need a babysitter, although obviously it would need occasional maintenance checks. As far as a rooftop, I don't know--this is a scaled prototype and not full size, so I guess it depends on the size and height of the roof.
This is very impressive, Ann. Do you know if it needs a babysitter on the ground? Or is it fully automatic? I would imagine this would probably have to be situated in rural areas. But who knows. Maybe it could be situated on a rooftop in Manhattan.
Using a 3D printer, CNC router, and existing powertrain components, a team of engineers is building an electric car from scratch on the floor of the International Manufacturing Technology Show in Chicago this week.
In November, a European space probe will try to land on the surface of a comet moving at about 84,000 mph and rotating with a period of 12.7 hours. Many factors make positioning the probe for the landing an engineering challenge.
NinjaFlex flexible 3D printing filament made from thermoplastic elastomers is available in a growing assortment of colors, most recently gold and silver. It's flexible and harder than you'd expect: around 85A (Shore A).
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.