A pet peeve is the veneration of the ancient pyramids:A pyramid is the simplest of structures; mere variations of piles of dirt and rocks! The inverse of a hole-in-the-ground!A pyramid is close to non-optimal material utilization – the least amount of building that you can get for given amounts of resources.Vaulting is primitive, mostly corbeling with very few examples of anything as "advanced" as triangular arches.Layout requires nothing more than high school geometry (I reject the notion that anyone who got an A in Geometry was taught by aliens).
The author highlights how primitive the pyramids are by his immediate contrast of the Romans.
I have viewed Engineering as the profession of how to do the most with the least -- considering volume of stonework enclosure, on one end you have the pyramid piles and on another you have gothic cathedrals (still just Geometry).
Still "Quantity has a quality all its own."When SAC was having a B52-capable runway built in Salina, KS, the Officers were frustrated with the detail of analysis the Civil Engineers were presenting to figure out how thick the runway had to be to land B52s.Finally, a General stood up and demanded, "Would 2 feet of concrete be enough?"To which the Engineer replied, "Yes, but 2 feet!?!"So, today, aviation in Salina has a very stable runway.
Yes, there is a tradeoff between durability and utilization, Engineering failure is often a case of carrying utilization too far (using tie rods so thin that welding becomes a risk,replacing butter with hydrogenated soybean oil), but the pyramids carry durability to the point of practical uselessness.It would be technically simple to recreate the Egyptian Monuments today, but why?
Please Note: I'm not bagging on the article, but on the idea that pyramids represent much advancement other than social organization.
Although Diamond's background is not in anthropology, archaeology, culture studies, or even history, he did an amazingly good job of taking the macro approach and synthesizing much work that's already been done in those areas. The result is a very thoughtful and thought-provoking analysis. Several scholars in some of the above disciplines were apparently annoyed that he did this analysis (or publicized it) before they thought of it.
Dave, "Guns, Germs and Steel" by Jared Diamond is a great read and also an excellent analysis of the big-picture reasons behind why Spaniards conquered the in many ways more advanced New World cultures, the Incas and Aztecs, instead of the other way around. The lack of iron and steel is certainly a major, but not the only, factor.
@Ann: You're definitely right about the "three age" classification system not being particularly applicable to Africa, Australia, or the Americas. I was alluding to that with my reference to Mesoamerica. On the other hand, history might have turned out very differently if the Aztecs had developed ferrous metallurgy. In terms of civil engineering, Tenochtitlan was much larger and better laid-out than any city in Spain, and Nezahualcoyotl, who is credited with designing the city's levees, was probably at least the equal of any Renaissance European thinker. But it's hard to beat gunpowder and steel.
Dave, I agree with you about the importance of materials and materials engineering, as well as structures and civil/architectural engineering, helping to define different eras of human cultural advance. Since those advances happened at different times in different parts of the world, the Old Stone, New Stone, Bronze and Iron Age labels turned out to be not as useful as when they were invented to describe what early archeologists were discovering about ancient European history. I think the combination of materials and what's made with them--tools, machines, buildings, art--are some key indicators of the nature of a particular culture, as much as the particular ideology.
Being a civil engineer, Professor Petroski naturally focuses on monuments of civil engineering. Certainly the examples which he gives, such as the Pyramids, are iconic of the civilizations which produced them.
But as a materials engineer, I'd like to think that the role of materials engineering has been even more fundamental to civilization. After all, entire historical epochs are named after the materials which were used (the Stone Age, the Bronze Age, the Iron Age, etc.). The Mesoamerican civilizations prove that highly advanced societies can be built using primarily stone tools -- but they were unable to defend themselves against less-civilized European invaders, because the Europeans had steel weapons. And, of course, the Bible records that the Bronze Age Israelites were unable to overcome Caananite tribes who had iron chariots.
Of course, mechanical engineers might argue that tool use is even more fundamental. It used to be said that tool use is what separated humanity from other animals, although now there is some evidence to the contrary. (And, by the way, all tools need to be made out of something).
All in all, it seems clear that it is difficult, if not impossible, to separate the superstructure of human civilization from its technological and material base.
That's good news Bdcst. I didn't realize some of the Android handsets were doing that. It would be nice to see Apple adopt that model. With each new release, they send millions of phones to the trash can.
Good point, Chuck. Risk is not an intrinsic virtue any more than all movement is forward. I think the point of the IBM study is that the company had created a risk adverse culture and that was a problem that needed to be solved. I'm sure IBM has lived through 17 cultures since that study. My guess is that rick adversity is not the company's major concern any longer. They may be more worried about whether all major golf courses are willing to welcome their CEO.
I'll add a point to your point, Droid. The cars of the "good old days" were doing well to get to 100,000 miles. Today, many vehicles reach 200,000 to 250,000 miles. Today's cars are far, far more reliable.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.