The vehicle must have a more powerful engine for the times when it is needed for survival. Sometimes it happens that conditions require rapid acceleration and making a very fast exit, or else winding up dead. So a tactical vehicle must have that capability.
The ability to deliver useful electrical power to an external load is a" big deal", since that form of power is not used in the normal operation of an electrical vehicle of any kind. So it would be interesting to have an explanation of just how the conversion from high voltage battery DC to 120/240 volts AC is accomplished in a small package in this vehicle.
William,
First I'll put up a 50hp ICE and a 150hp E motor any day against a 300hp diesel and leave it in the dust while getting 65-75% better fuel mileage. That better fuel mileage adds up in $ and lives from not having to truck fuel in.
And high power silent operation could be a lifesaver too. One E Humvee drove up behind a presentation and no one noticed it a couple ft behind them. That kind of stealth can be very valuable, No?
Plus they can be charged from RE in the field up to the battery range. EV racers normally beat ICE's of 2x's the rated power on drag strips and likely do to instance acceleration and a flat and high torque curve starting from 0 rpm.
Having electric power is a big deal but they always have had it with belt driven gens. Nor is EV or hybrids news as both have been in production a long time ago.
The 1998? E Ranger EV was equipted with a 150kw ACPropulsion inverter, same one that inverted for the motor they stil make. Isn't that enough for you? So please don't try to say these are new or can't be done as they have in mass production.
As for the explaination of how an inverter would do high DC to AC just about all inverter do exacty that. Most all UPS, many other inverters boost DC to a high voltage like 300vdc then PMW it into AC of the voltage wanted. No? If not please explain?
Thanks for the hurricane tale, Jerry. Since the military is concerned about providing power in remote locations, this idea makes a lot of sense. It also looks like it has apps in first responder and other emergency situations.
The vehicle must have a more powerful engine for the times when it is needed for survival. Sometimes it happens that conditions require rapid acceleration and making a very fast exit, or else winding up dead. So a tactical vehicle must have that capability.
The ability to deliver useful electrical power to an external load is a" big deal", since that form of power is not used in the normal operation of an electrical vehicle of any kind. So it would be interesting to have an explanation of just how the conversion from high voltage battery DC to 120/240 volts AC is accomplished in a small package in this vehicle.
While it is an example, eff, etc it isn't. Far better hybrid Humvees have already been done.
My big objection is the huge motor for a military vehicle. It shouldn't be over 100hp and should be well under 50hp with a 150hp E motor and 10 mile battery range would give it far better peformance, economy and stealth.
As for vehicles powering other things been done since they were invented.
I used my EV's to power my home for 3 days after a hurricane killing the power.
And a good number of pickup and commercial untility, construction, etc trucks have this stock retail now.
The Nissam Leaf EV has this now also as an option.
Good point, Jon. Likewise, military developments in a wide range of technology can be transferred to local and state law enforcement as well as emergecy operations.
We're increasingly seeing vehicles with electricity-generating capabilities. Hybrids, with their higher-voltage electrical architectures, are great candidates for this. Mitsubishi's i-MiEV also offered this capability, and it was used after the tsunami knocked out power in Japan.
During the southeast Asian tsunami, a US aircraft carrier provided on-site medical care, food, fuel, air-lift services to isolated vilages, fresh water, and electrical power to the survivors. Although a tool of war, military equipment also can serve humanitarian purposes.
Elizabeth, this is a good example of continued innovation in military equipment. Anything you can do to reduce supply requirements helps. It could also be used for commercial purposes to allow operation in remote areas. With all the electronics we use in both the military and commercial worlds, this helps extend our reach.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
