Thanks, Ann. Interesting developments. I know that Adept has been doing more in the area of mobile robotics with an acquisition in the last year or so. It will be interesting to see the direction this type of effort takes and what applications become more the area of focus.
naperlou, this initiative is in its early stages, so it's too soon to tell what will happen with support. I think ttext's point is well taken. In addition, the industrial robot companies are huge and have been developing their own software internally for a long time, so their support needs, assuming they are interested in open source, may be quite different from those of individual hobbyist developers. An open source model for the same basic software platform--ROS--is also being pursued in universities for the Raven II surgical robot. Whether or not a ROS-Surgical comes out of that university research will be interesting to see.
Beth, it's much too soon to know, since this initiative has just begun, and so far, I think there are two industrial robot companies that have shown interest. Industrial robotics seems to be dominated by three or four large companies, all with their own proprietary hardware and software. I'm not at all clear about how this would benefit them. However, we've had discussions in several other comment threads about the complexities of robot control software and the value--and difficulties--of developing easier-to-use point and click software.
For those interested in such things, www.linuxCNC.org is an open source "CNC" project that derived from work done by NIST in the 90's.
The codebase was started by people at NIST, then went open source when the NIST project ended. The code has all of the elements of a full motion control system, including trajectory planning, and forward and reverse kinematics modules that allow it to control strange machine geometries such as stewart platforms.
Ann and Beth, that is a good question. I looked at their site, and support is strictly "community" or Willow Garage itself. There is no paid support. Open source software in general works becuase there is a paid support option. You can develop without spending money on the software. When you are doing something commercial, you can then purchase support, and in some cases a more capable version of the software. This "upgrade" path is important. I don't see that here. I expect that this will remain a research and hobbyist item.
Another great example of the power of open source software. What's your sense, Ann, of how open source can foster the development and functionality of industrial robots? Have there been limitations with the technology and its application due to proprietary standards and platforms?
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
