It may have just been designed cheap overseas, but it could have been designed in the desert Southwest, where humidity (and its problems) doesn't occur to people. In western Oregon, we think about humidity all the time.
It causes problems when designers/installers from dry climates work here in the summer, and don't have a clue about driving rain and 70% humidity for 6 months of the year.
On the other hand, static damage occurs to those folks often, but is not so much of a problem here.
Nadine, in most of the cases the best part is it may be only a minor or silly faults. But in a fast life mode, nobody has the time to just check atleast the basic things before calling a service person.
Anne, we had one of those non-electronic dehumidifiers and ours put in 10 years in one basement and another 20 in our Massachusetts house. It had one dial that went from OFF through LOW (humidity) to HIGH. The coils filled up with dust and required a thorough yearly cleaning with an outdoor hose, but otherwise the dehumidifier kept running and running and running. We left it for the buyer when we moved to Utah where we have no humidity problems.
Now that people note problems with small disc switches on front panels, I wonder how long our washing machine and dishwasher will last. I can't think of more humid operating environments. Perhaps the manufacturers used gold contacts.
When I went shopping for a dehumidifier several years ago, I of course looked at the cheaper ones first, which are aimed at consumers. Although they're a lot prettier than the industrial versions, they just didn't look serious: I live in a rainforest and I wanted to buy something that really works here. So I passed those by. The only electronics in my $900 portable, rollaround, commercial-grade industrial-strength, ugly gray metal Ebac dehumidifier are probably a few sensors and the LED "full" light on the front panel. More germane to this story, the only front-panel control is a mechanical rotary dial to indicate what percentage humidity I want it to keep. Although we've had to open it up and clean out the air filter every couple of years, it's been a workhorse and well worth the investment.
As an exercise in "discovery" & satisfaction for the more experienced among us, it would be interesting to find out WHO the manufacturer of this dehumidifier was, and get more info on the design team. IF the "chief engineer" of this company has an advanced degree from one of our prestigious business schools (think M.B.A. here!!), then it's no wonder that the switch design was marginal from the outset. Experienced engineers would have nixed using a pad switch w/ silver contacts, instead opting for a tad more expensive gold contact, which exhibits no oxidation properties. And, IF the engineers were recent grads, with little real world experience, the silver oxidation & migration phenomenon would have been alien to them.
Good question, Nadine. Even so, I would think manufacturers should test their products in consumer applications before sending then off into the consumer world. The last place they want to find out about problems is from their customers.
It is interesting how many companies make mistakes like this. It reminds me of the old 1960s British sports cars I had. They were really fun, but terriably unreliable. The engines were relatively heavy and overdesigned. They would last forever. It was always some switch or small part that would break. We joked that these were designed by their new engineers.
I worked for a company that made agricultural electronics. We quickly found that it's very difficult to manufacture a membrane switch that's reliable in an outdoor environment. We went through several vendors before finding one that could manufacture a robust switch. Most of the problems were from silver migration, where the silver trace in the switch panel migrates to an adjacent trace. Not surprisingly, a more robust switch also cost a little more money.
Since the problem with the humidifier was caused by a switch making marginal contact I wonder if the pull-up resistor was too stiff to work properly as the product aged?
It's scary how many manufacturers don't pay enough attention to all of the design considerations that go along with optimizing a product for its environment. This was a nice find, as noted, but a real bogus oversight on the part of the manufacturer. That kind of testing, especially given what the dehumidifier is supposed to do, isn't rocket science--just common design sense. A simple, cost-effective choice of another type of material for the push buttons would have been all that was necessary to avoid any issues.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.