It may have just been designed cheap overseas, but it could have been designed in the desert Southwest, where humidity (and its problems) doesn't occur to people. In western Oregon, we think about humidity all the time.
It causes problems when designers/installers from dry climates work here in the summer, and don't have a clue about driving rain and 70% humidity for 6 months of the year.
On the other hand, static damage occurs to those folks often, but is not so much of a problem here.
Nadine, in most of the cases the best part is it may be only a minor or silly faults. But in a fast life mode, nobody has the time to just check atleast the basic things before calling a service person.
Anne, we had one of those non-electronic dehumidifiers and ours put in 10 years in one basement and another 20 in our Massachusetts house. It had one dial that went from OFF through LOW (humidity) to HIGH. The coils filled up with dust and required a thorough yearly cleaning with an outdoor hose, but otherwise the dehumidifier kept running and running and running. We left it for the buyer when we moved to Utah where we have no humidity problems.
Now that people note problems with small disc switches on front panels, I wonder how long our washing machine and dishwasher will last. I can't think of more humid operating environments. Perhaps the manufacturers used gold contacts.
When I went shopping for a dehumidifier several years ago, I of course looked at the cheaper ones first, which are aimed at consumers. Although they're a lot prettier than the industrial versions, they just didn't look serious: I live in a rainforest and I wanted to buy something that really works here. So I passed those by. The only electronics in my $900 portable, rollaround, commercial-grade industrial-strength, ugly gray metal Ebac dehumidifier are probably a few sensors and the LED "full" light on the front panel. More germane to this story, the only front-panel control is a mechanical rotary dial to indicate what percentage humidity I want it to keep. Although we've had to open it up and clean out the air filter every couple of years, it's been a workhorse and well worth the investment.
As an exercise in "discovery" & satisfaction for the more experienced among us, it would be interesting to find out WHO the manufacturer of this dehumidifier was, and get more info on the design team. IF the "chief engineer" of this company has an advanced degree from one of our prestigious business schools (think M.B.A. here!!), then it's no wonder that the switch design was marginal from the outset. Experienced engineers would have nixed using a pad switch w/ silver contacts, instead opting for a tad more expensive gold contact, which exhibits no oxidation properties. And, IF the engineers were recent grads, with little real world experience, the silver oxidation & migration phenomenon would have been alien to them.
Good question, Nadine. Even so, I would think manufacturers should test their products in consumer applications before sending then off into the consumer world. The last place they want to find out about problems is from their customers.
It is interesting how many companies make mistakes like this. It reminds me of the old 1960s British sports cars I had. They were really fun, but terriably unreliable. The engines were relatively heavy and overdesigned. They would last forever. It was always some switch or small part that would break. We joked that these were designed by their new engineers.
I worked for a company that made agricultural electronics. We quickly found that it's very difficult to manufacture a membrane switch that's reliable in an outdoor environment. We went through several vendors before finding one that could manufacture a robust switch. Most of the problems were from silver migration, where the silver trace in the switch panel migrates to an adjacent trace. Not surprisingly, a more robust switch also cost a little more money.
Since the problem with the humidifier was caused by a switch making marginal contact I wonder if the pull-up resistor was too stiff to work properly as the product aged?
It's scary how many manufacturers don't pay enough attention to all of the design considerations that go along with optimizing a product for its environment. This was a nice find, as noted, but a real bogus oversight on the part of the manufacturer. That kind of testing, especially given what the dehumidifier is supposed to do, isn't rocket science--just common design sense. A simple, cost-effective choice of another type of material for the push buttons would have been all that was necessary to avoid any issues.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
