Rob, the Ricardo report at this link appears to be an assessment of the viability of vehicle CO2 lifecycle analyses, rather than an actual analysis. It claims that tailpipe analysis is not enough, and that "CO2 emissions resulting from the generation of the fuel, or those embedded within the vehicle production" should also be included. It then gives an exhaustive analysis of all the possible factors that can impact CO2 production, including fuel generation, design-for-disassembly, components sourcing, recycling and other EOL issues, and lots more. There is a notation toward the end that hybrids and EVs significantly decrease CO2 in use (=tailpipe analysis), but tend to increase emissions during production, compared to cars that run on petro-based fuel. However, there's no discussion in this report of how composites stack up against steel in an LCA. I'd be interested to see the steel industry's claims verified by a truly third-party independent analysis: they may well be right.
Yes. The gist of the report, if I remember right, is the claim that composites require more energy and the manufacturing process than steel and that steel is far easier to recycle at the back end.
Thanks, Rob. Scanning this report makes me consider the complexities of LCA (lifecycle analysis), meaning, there are so many factors to consider for a single product that such analysis must get quite complicated. No wonder the practice, and even the concept, is still just getting off the ground, and only in some industries.
Sure, Ann. Last fall I did a story on the steel industry's effort to tout steel's relatively clean carbon footprint. The arguement is that steel is greener than many of the alternatives if you look at the entire lifecycle of the materials.
Yes, I've seen the steel association pushing the value of strong lightweight steel. Their big push is that when you combine lightweight steel with the easy recycling of steel, you get a product that beats composites for birth-to-grave green. It's an interesting argument.
Your reference to steel is apt. That's one industry that can't easily adopt sustainable developments and simply add those developments to its existing supply chain. That also explains why steel is fighting so hard lately to prove its value.
Yes, I think those two situations are parallel. This also explains why so much that has been developed so far are in the form of, more or less, engineering design and manufacturing drop-in replacements. Even the mushroom based packaging is designed to compete directly with Styrofoam, and, as we saw, the makers of Styrofoam are interested in it, too. This is a different situation from steel makers being challenged by composites. since the entire manufacturing and supply chain is quite different.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
