Rob, the Ricardo report at this link appears to be an assessment of the viability of vehicle CO2 lifecycle analyses, rather than an actual analysis. It claims that tailpipe analysis is not enough, and that "CO2 emissions resulting from the generation of the fuel, or those embedded within the vehicle production" should also be included. It then gives an exhaustive analysis of all the possible factors that can impact CO2 production, including fuel generation, design-for-disassembly, components sourcing, recycling and other EOL issues, and lots more. There is a notation toward the end that hybrids and EVs significantly decrease CO2 in use (=tailpipe analysis), but tend to increase emissions during production, compared to cars that run on petro-based fuel. However, there's no discussion in this report of how composites stack up against steel in an LCA. I'd be interested to see the steel industry's claims verified by a truly third-party independent analysis: they may well be right.
Yes. The gist of the report, if I remember right, is the claim that composites require more energy and the manufacturing process than steel and that steel is far easier to recycle at the back end.
Thanks, Rob. Scanning this report makes me consider the complexities of LCA (lifecycle analysis), meaning, there are so many factors to consider for a single product that such analysis must get quite complicated. No wonder the practice, and even the concept, is still just getting off the ground, and only in some industries.
Sure, Ann. Last fall I did a story on the steel industry's effort to tout steel's relatively clean carbon footprint. The arguement is that steel is greener than many of the alternatives if you look at the entire lifecycle of the materials.
Yes, I've seen the steel association pushing the value of strong lightweight steel. Their big push is that when you combine lightweight steel with the easy recycling of steel, you get a product that beats composites for birth-to-grave green. It's an interesting argument.
Your reference to steel is apt. That's one industry that can't easily adopt sustainable developments and simply add those developments to its existing supply chain. That also explains why steel is fighting so hard lately to prove its value.
Yes, I think those two situations are parallel. This also explains why so much that has been developed so far are in the form of, more or less, engineering design and manufacturing drop-in replacements. Even the mushroom based packaging is designed to compete directly with Styrofoam, and, as we saw, the makers of Styrofoam are interested in it, too. This is a different situation from steel makers being challenged by composites. since the entire manufacturing and supply chain is quite different.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
