View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 24/24
User Rank
Ollie   4/18/2012 3:14:22 PM
This goes against what many of us assume.  But I think some might be jumping to conclusions a bit early.


If you look at the numbers by quarter you see a huge drop off in Q2 of 2011. Loyality went from 40% to 26%.  And that would be the lowest for any quarter since 2008 when this study begins.  


It's probably reasonable to assume that the Japanese earthquake and Tsunami had some affect on supply.  When those Prius owners can't get a new one some have to buy something else.


And so by the end of Q4 you see loayalty back at 40%.  



Rob Spiegel
User Rank
Re: Hybrid redux is critical to success
Rob Spiegel   4/18/2012 2:01:08 PM
Interesting statistics in this article, Chuck. I guess the big question is whether the hybrid owners who chose not to continue with a hybrid went on to buy an EV. It could be that those devoted enough to get a hybrid would be even more interested in an EV now that there are more choices in the EV world.

User Rank
Re: Hybrid redux is critical to success
naperlou   4/18/2012 10:02:40 AM
Beth, another disturbing statistic is the market penetration rate.  It is declining.  It is also very small. 

I looked at hybrids recently.  One of the ones I saw had a break even period of at least 2 years.  That seemed fairly good since I would keep a car for much longer than that.  On the other hand, I think that was optomistic.  So,  considering the points made in the article, it seems that gasoline vehicles will catch up to hybrids in total cost of ownership (TCO) before long.  In many technology businesses TCO is an important selling point.  In the consumer field this is becoming important as well.

User Rank
Re: Performance in Hybrid car
GlennA   4/18/2012 8:51:02 AM
I have had my hybrid for just over a year, and when the time comes, I may not buy another.  But it's not because I am not happy with it.  The Chrysler Aspen Two Mode Hemi Hybrid was only produced for about 1/2 of the 2009 model year.  When it comes time to replace it, I don't know if I will be able to find another hybrid rated to tow - the Aspen is rated to tow 6000 lbs.  I looked at the Ford Escape and Toyota Highlander hybrids and their spec's were lacklustre when compared to the Aspen.  When (if ?) the SUV and truck market opens up to the idea of hybrids, there might be another Chrysler Aspen.  I think Dodge has a truck package that is similar to a hybrid, but I think the selling point was the truck with a generator package for remote construction sites.

User Rank
Performance in Hybrid car
Mydesign   4/18/2012 8:31:09 AM
1 saves
Charles, you are right, those who have hybrid cars, won't prefer it again. The initial cost for hybrid cars are more when compare with stand alone fuel vehicles. I had a hybrid car and I feel that, when am switching out of gasoline, the engine power and pulling are comes down. I mean the engine is not outputting 100% of its performance. This is a disappointing factor for those who love crazy driving.

Beth Stackpole
User Rank
Hybrid redux is critical to success
Beth Stackpole   4/18/2012 7:09:37 AM
I think the fact that hybrid owners aren't ponying up when they're back in the car market for another hybrid vehicle has to speak volumes. Unless the data shows they're ponying up for another type of alternative vehicle like a pure EV, I don't know how you can interpret the findings any other way but to say the technology is losing ground. We all know it's much easier to sell something to someone who has already purchased it once or bought into the overall value proposition. I find these findings pretty disheartening.

<<  <  Page 24/24

Partner Zone
Latest Analysis
A database containing information on over 16,000 tests done on 500 composites and other materials for wind turbine blades is now available free from Sandia National Laboratories.
Imagine being able to illegally download a physical product the same way you can with music and videos. That’s basically what’s happening with 3D printing and digital manufacturing, with huge repercussions in the intellectual property domain.
Our latest Design News Quick Poll reveals that readers are facing serious cyber security challenges.
Ford will be the first automaker to commercially use Alcoa's tough & fast Micromill aluminum alloy process and materials, debuting on several 2016 F-150 truck components. Alcoa will also license its Micromill process and materials technology to Danieli Group.
Even as an increasing number of instrument manufacturers migrate toward modern touch screens, many engineers say they still prefer the tactile feel of knobs and buttons, a new survey says.
Design News Webinar Series
10/1/2015 11:00 a.m. California / 2:00 p.m. New York
9/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 19 - 23, Embedded System Design Techniques™ - Driver Design Patterns and the Internet
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service